diff options
Diffstat (limited to 'overlay/frameworks/base/core')
3 files changed, 0 insertions, 511 deletions
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml deleted file mode 100644 index 0749e77..0000000 --- a/overlay/frameworks/base/core/res/res/values/config.xml +++ /dev/null @@ -1,374 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?> -<!-- Copyright (C) 2009 The Android Open Source Project - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> - -<!-- These resources are around just to allow their values to be customized - for different hardware and product builds. Do not translate. --> -<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> - - <!-- Flag indicating whether the we should enable the automatic brightness in Settings. - Software implementation will be used if config_hardware_auto_brightness_available is not set --> - <bool name="config_automatic_brightness_available">true</bool> - - <!-- Array of light sensor lux values to define our levels for auto backlight brightness support. - The N entries of this array define N + 1 control points as follows: - (1-based arrays) - Point 1: (0, value[1]): lux <= 0 - Point 2: (level[1], value[2]): 0 < lux <= level[1] - Point 3: (level[2], value[3]): level[2] < lux <= level[3] - ... - Point N+1: (level[N], value[N+1]): level[N] < lux - The control points must be strictly increasing. Each control point - corresponds to an entry in the brightness backlight values arrays. - For example, if lux == level[1] (first element of the levels array) - then the brightness will be determined by value[2] (second element - of the brightness values array). - Spline interpolation is used to determine the auto-brightness - backlight values for lux levels between these control points. - Must be overridden in platform specific overlays --> - <array name="config_autoBrightnessLevels"> - <item>1</item> - <item>2</item> - <item>4</item> - <item>6</item> - <item>8</item> - <item>10</item> - <item>15</item> - <item>20</item> - <item>25</item> - <item>30</item> - <item>35</item> - <item>40</item> - <item>45</item> - <item>50</item> - <item>55</item> - <item>60</item> - <item>65</item> - <item>70</item> - <item>75</item> - <item>80</item> - <item>85</item> - <item>90</item> - <item>95</item> - <item>100</item> - <item>120</item> - <item>140</item> - <item>160</item> - <item>180</item> - <item>200</item> - <item>220</item> - <item>240</item> - <item>260</item> - <item>280</item> - <item>300</item> - <item>320</item> - <item>340</item> - <item>360</item> - <item>380</item> - <item>400</item> - <item>420</item> - <item>440</item> - <item>460</item> - <item>480</item> - <item>500</item> - <item>700</item> - <item>900</item> - <item>1100</item> - <item>1300</item> - <item>1500</item> - <item>1700</item> - <item>1900</item> - <item>2000</item> - <item>2500</item> - <item>3000</item> - <item>3500</item> - <item>4000</item> - <item>4500</item> - <item>5000</item> - <item>5500</item> - <item>6000</item> - <item>6500</item> - <item>7000</item> - <item>7500</item> - <item>8000</item> - <item>8500</item> - <item>9000</item> - <item>9500</item> - <item>10000</item> - <item>10500</item> - <item>11000</item> - <item>11500</item> - <item>12000</item> - <item>12500</item> - <item>13000</item> - <item>13500</item> - <item>14000</item> - <item>14500</item> - <item>15000</item> - <item>16000</item> - <item>17000</item> - <item>18000</item> - <item>19000</item> - <item>20000</item> - <item>21000</item> - <item>22000</item> - <item>23000</item> - <item>24000</item> - <item>25000</item> - <item>26000</item> - <item>27000</item> - <item>28000</item> - <item>29000</item> - <item>30000</item> - <item>35000</item> - <item>40000</item> - <item>45000</item> - <item>50000</item> - <item>55000</item> - <item>60000</item> - <item>65000</item> - <item>70000</item> - <item>75000</item> - <item>80000</item> - <item>85000</item> - <item>90000</item> - <item>95000</item> - <item>100000</item> - </array> - - <!-- Array of desired screen brightness in nits corresponding to the lux values - in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and - config_screenBrightnessMaximumNits, the display brightness is defined as the measured - brightness of an all-white image. - If this is defined then: - - config_autoBrightnessLcdBacklightValues should not be defined - - config_screenBrightnessNits must be defined - - config_screenBrightnessBacklight must be defined - This array should have size one greater than the size of the config_autoBrightnessLevels - array. The brightness values must be non-negative and non-decreasing. This must be - overridden in platform specific overlays --> - <array name="config_autoBrightnessDisplayValuesNits"> - <item>4.5</item> - <item>6.6</item> - <item>8.0</item> - <item>20.0</item> - <item>24.3</item> - <item>29.7</item> - <item>34.0</item> - <item>46.0</item> - <item>59.0</item> - <item>76.0</item> - <item>81.0</item> - <item>82.0</item> - <item>82.0</item> - <item>82.0</item> - <item>83.0</item> - <item>83.0</item> - <item>83.0</item> - <item>84.0</item> - <item>84.0</item> - <item>85.0</item> - <item>85.0</item> - <item>85.0</item> - <item>85.0</item> - <item>86.0</item> - <item>86.0</item> - <item>87.0</item> - <item>89.0</item> - <item>90.0</item> - <item>91.0</item> - <item>93.0</item> - <item>94.0</item> - <item>96.0</item> - <item>97.0</item> - <item>99.0</item> - <item>100.0</item> - <item>101.0</item> - <item>104.0</item> - <item>105.0</item> - <item>106.0</item> - <item>108.0</item> - <item>109.0</item> - <item>111.0</item> - <item>112.0</item> - <item>114.0</item> - <item>116.0</item> - <item>137.0</item> - <item>157.0</item> - <item>180.0</item> - <item>205.0</item> - <item>226.0</item> - <item>257.0</item> - <item>280.0</item> - <item>295.0</item> - <item>369.0</item> - <item>400.0</item> - <item>416.7</item> - <item>433.3</item> - <item>450.0</item> - <item>466.7</item> - <item>483.3</item> - <item>500.0</item> - <item>512.5</item> - <item>525.0</item> - <item>537.5</item> - <item>550.0</item> - <item>562.5</item> - <item>575.0</item> - <item>587.5</item> - <item>600.0</item> - <item>610.0</item> - <item>620.0</item> - <item>630.0</item> - <item>640.0</item> - <item>650.0</item> - <item>660.0</item> - <item>670.0</item> - <item>680.0</item> - <item>690.0</item> - <item>700.0</item> - <item>705.0</item> - <item>710.0</item> - <item>715.0</item> - <item>720.0</item> - <item>725.0</item> - <item>730.0</item> - <item>735.0</item> - <item>740.0</item> - <item>745.0</item> - <item>750.0</item> - <item>755.0</item> - <item>760.0</item> - <item>765.0</item> - <item>770.0</item> - <item>775.0</item> - <item>800.0</item> - <item>816.7</item> - <item>833.3</item> - <item>850.0</item> - <item>866.7</item> - <item>883.3</item> - <item>900.0</item> - <item>914.3</item> - <item>928.6</item> - <item>942.9</item> - <item>957.1</item> - <item>971.4</item> - <item>985.7</item> - <item>1000.0</item> - </array> - - <!-- An array of floats describing the screen brightness in nits corresponding to the backlight - values in the config_screenBrightnessBacklight array. On OLED displays these values - should be measured with an all white image while the display is in the fully on state. - Note that this value should *not* reflect the maximum brightness value for any high - brightness modes but only the maximum brightness value obtainable in a sustainable manner. - This array should be equal in size to config_screenBrightnessBacklight --> - <array name="config_screenBrightnessNits"> - <item>4.5</item> - <item>1000.0</item> - </array> - - <!-- An array describing the screen's backlight values corresponding to the brightness - values in the config_screenBrightnessNits array. - This array should be equal in size to config_screenBrightnessBacklight. --> - <integer-array name="config_screenBrightnessBacklight"> - <item>1</item> - <item>255</item> - </integer-array> - - <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used - for debouncing the light sensor. Different constants are used to debounce the light sensor - when adapting to brighter or darker environments. This parameter controls how quickly - brightness changes occur in response to an observed change in light level that exceeds the - hysteresis threshold. --> - <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer> - <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer> - - <!-- The maximum range of gamma adjustment possible using the screen - auto-brightness adjustment setting. --> - <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction> - - <!-- Vibrator pattern for feedback about a long screen/key press --> - <integer-array name="config_longPressVibePattern"> - <item>0</item> - <item>10</item> - </integer-array> - - <!-- Vibrator pattern for feedback about touching a virtual key --> - <integer-array name="config_virtualKeyVibePattern"> - <item>0</item> - <item>10</item> - </integer-array> - - <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> - <integer-array name="config_keyboardTapVibePattern"> - <item>10</item> - </integer-array> - - <!-- The bounding path of the cutout region of the main built-in display. - Must either be empty if there is no cutout region, or a string that is parsable by - {@link android.util.PathParser}. - The path is assumed to be specified in display coordinates with pixel units and in - the display's native orientation, with the origin of the coordinate system at the - center top of the display. - To facilitate writing device-independent emulation overlays, the marker `@dp` can be - appended after the path string to interpret coordinates in dp instead of px units. - Note that a physical cutout should be configured in pixels for the best results. - Example for a 10px x 10px square top-center cutout: - <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string> - Example for a 10dp x 10dp square top-center cutout: - <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string> - @see https://www.w3.org/TR/SVG/paths.html#PathData - --> - <string name="config_mainBuiltInDisplayCutout"> - M 25,20 - h -50 - v 80 - h 50 - Z - </string> - - <!-- Whether device has a physical display cutout --> - <bool name="config_physicalDisplayCutout">true</bool> - - <!-- The default refresh rate. Apollo manages this using the peak refresh rate setting, so set - this value to 0 so it has no effect. --> - <integer name="config_defaultRefreshRate">0</integer> - - <!-- The default peak refresh rate. --> - <integer name="config_defaultPeakRefreshRate">120</integer> - <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool> - <bool name="config_dozeAlwaysOnEnabled">true</bool> - - <!-- If true, the display will be shifted around in ambient mode. --> - <bool name="config_enableBurnInProtection">true</bool> - - <!-- Indicates whether device has a power button fingerprint sensor. --> - <bool name="config_is_powerbutton_fps" translatable="false" >true</bool> - - - <!-- An array of arrays of side fingerprint sensor properties relative to each display. - Note: this value is temporary and is expected to be queried directly - from the HAL in the future. --> - <array name="config_sfps_sensor_props" translatable="false"> - <item>@array/config_sfps_sensor_props_0</item> - </array> - - <array name="config_sfps_sensor_props_0" translatable="false"> - <item></item> <!--item>displayId</item--> - <item>1080</item> <!--item>sensorLocationX</item--> - <item>920</item> <!--item>sensorLocationY</item--> - <item>200</item> <!--item>sensorRadius</item--> - </array> - -</resources> diff --git a/overlay/frameworks/base/core/res/res/values/dimens.xml b/overlay/frameworks/base/core/res/res/values/dimens.xml deleted file mode 100644 index be50eef..0000000 --- a/overlay/frameworks/base/core/res/res/values/dimens.xml +++ /dev/null @@ -1,26 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?> -<!-- -/* //device/apps/common/assets/res/any/dimens.xml -** -** Copyright 2006, The Android Open Source Project -** -** Licensed under the Apache License, Version 2.0 (the "License"); -** you may not use this file except in compliance with the License. -** You may obtain a copy of the License at -** -** http://www.apache.org/licenses/LICENSE-2.0 -** -** Unless required by applicable law or agreed to in writing, software -** distributed under the License is distributed on an "AS IS" BASIS, -** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -** See the License for the specific language governing permissions and -** limitations under the License. -*/ ---> -<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> - - <dimen name="rounded_corner_content_padding">47.0px</dimen> - <dimen name="rounded_corner_radius">102.0px</dimen> - <dimen name="status_bar_height_portrait">110.0px</dimen> - -</resources> diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml deleted file mode 100644 index bc60d86..0000000 --- a/overlay/frameworks/base/core/res/res/xml/power_profile.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?> -<device name="Android"> - <item name="ambient.on">0.1</item> - <item name="screen.on">100.2</item> - <item name="screen.full">208</item> - <item name="bluetooth.active">9</item> - <item name="bluetooth.on">0.47</item> - <item name="wifi.on">0.32</item> - <item name="wifi.active">148</item> - <item name="wifi.scan">25</item> - <item name="audio">13.6</item> - <item name="video">57</item> - <item name="camera.flashlight">86</item> - <item name="camera.avg">616</item> - <item name="gps.on">45</item> - <item name="radio.active">217</item> - <item name="radio.scanning">47</item> - <array name="radio.on"> - <value>2.82</value> - <value>1.82</value> - </array> - <array name="cpu.active"> - <value>0.1</value> - </array> - <array name="cpu.clusters.cores"> - <value>6</value> - <value>2</value> - </array> - <array name="cpu.core_speeds.cluster0"> - <value>300000</value> - <value>576000</value> - <value>710400</value> - <value>940800</value> - <value>1190400</value> - <value>1324800</value> - <value>1478400</value> - <value>1574400</value> - <value>1708800</value> - <value>1804800</value> - </array> - <array name="cpu.core_speeds.cluster1"> - <value>691200</value> - <value>940800</value> - <value>1228800</value> - <value>1401600</value> - <value>1516800</value> - <value>1651200</value> - <value>1804800</value> - <value>1900800</value> - <value>2054400</value> - <value>2208000</value> - </array> - <array name="cpu.core_power.cluster0"> - <value>35</value> - <value>39</value> - <value>46</value> - <value>65</value> - <value>86</value> - <value>105</value> - <value>117</value> - <value>172</value> - <value>187</value> - <value>208</value> - </array> - <array name="cpu.core_power.cluster1"> - <value>91</value> - <value>91</value> - <value>146</value> - <value>190</value> - <value>215</value> - <value>257</value> - <value>322</value> - <value>366</value> - <value>421</value> - <value>526</value> - </array> - <item name="cpu.idle">4.78</item> - <array name="memory.bandwidths"> - <value>22.7</value> - </array> - <item name="battery.capacity">5000</item> - <item name="battery.typical">5000</item> - <item name="wifi.controller.idle">1.4</item> - <item name="wifi.controller.rx">177</item> - <item name="wifi.controller.tx">269</item> - <array name="wifi.controller.tx_levels" /> - <item name="wifi.controller.voltage">3300</item> - <array name="wifi.batchedscan"> - <value>.0002</value> - <value>.002</value> - <value>.02</value> - <value>.2</value> - <value>2</value> - </array> - <item name="modem.controller.sleep">0</item> - <item name="modem.controller.idle">1</item> - <item name="modem.controller.rx">200</item> - <array name="modem.controller.tx"> - <value>293</value> - <value>296</value> - <value>316</value> - <value>401</value> - <value>506</value> - </array> - <item name="modem.controller.voltage">800</item> - <array name="gps.signalqualitybased"> - <value>0</value> - <value>0</value> - </array> - <item name="gps.voltage">0</item> -</device>
\ No newline at end of file |