diff options
Diffstat (limited to 'rro_overlays/FrameworksResOverlayVeux')
5 files changed, 808 insertions, 0 deletions
diff --git a/rro_overlays/FrameworksResOverlayVeux/Android.bp b/rro_overlays/FrameworksResOverlayVeux/Android.bp new file mode 100644 index 0000000..73a4e13 --- /dev/null +++ b/rro_overlays/FrameworksResOverlayVeux/Android.bp @@ -0,0 +1,22 @@ +// +// Copyright (C) 2021 ArrowOS +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// + +runtime_resource_overlay { + name: "FrameworksResOverlayVeux", + sdk_version: "current", + resource_dirs: ["res"], + vendor: true, +} diff --git a/rro_overlays/FrameworksResOverlayVeux/AndroidManifest.xml b/rro_overlays/FrameworksResOverlayVeux/AndroidManifest.xml new file mode 100644 index 0000000..9a1f441 --- /dev/null +++ b/rro_overlays/FrameworksResOverlayVeux/AndroidManifest.xml @@ -0,0 +1,21 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2021 ArrowOS + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> +<manifest xmlns:android="http://schemas.android.com/apk/res/android" + package="com.android.frameworksres.overlay.veux"> + + <application android:hasCode="false" /> + <overlay + android:targetPackage="android" + android:isStatic="true" + android:priority="1"/> +</manifest> diff --git a/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml b/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml new file mode 100644 index 0000000..b2c7751 --- /dev/null +++ b/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml @@ -0,0 +1,634 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2009 The Android Open Source Project + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<!-- These resources are around just to allow their values to be customized + for different hardware and product builds. Do not translate. --> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + + <!-- Flag indicating whether the we should enable the automatic brightness in Settings. + Software implementation will be used if config_hardware_auto_brightness_available is not set --> + <bool name="config_automatic_brightness_available">true</bool> + + <!-- Array of light sensor lux values to define our levels for auto backlight brightness support. + The N entries of this array define N + 1 control points as follows: + (1-based arrays) + Point 1: (0, value[1]): lux <= 0 + Point 2: (level[1], value[2]): 0 < lux <= level[1] + Point 3: (level[2], value[3]): level[2] < lux <= level[3] + ... + Point N+1: (level[N], value[N+1]): level[N] < lux + The control points must be strictly increasing. Each control point + corresponds to an entry in the brightness backlight values arrays. + For example, if lux == level[1] (first element of the levels array) + then the brightness will be determined by value[2] (second element + of the brightness values array). + Spline interpolation is used to determine the auto-brightness + backlight values for lux levels between these control points. + Must be overridden in platform specific overlays --> + <array name="config_autoBrightnessLevels"> + <item>1</item> + <item>2</item> + <item>4</item> + <item>6</item> + <item>8</item> + <item>10</item> + <item>15</item> + <item>20</item> + <item>25</item> + <item>30</item> + <item>35</item> + <item>40</item> + <item>45</item> + <item>50</item> + <item>55</item> + <item>60</item> + <item>65</item> + <item>70</item> + <item>75</item> + <item>80</item> + <item>85</item> + <item>90</item> + <item>95</item> + <item>100</item> + <item>120</item> + <item>140</item> + <item>160</item> + <item>180</item> + <item>200</item> + <item>220</item> + <item>240</item> + <item>260</item> + <item>280</item> + <item>300</item> + <item>320</item> + <item>340</item> + <item>360</item> + <item>380</item> + <item>400</item> + <item>420</item> + <item>440</item> + <item>460</item> + <item>480</item> + <item>500</item> + <item>700</item> + <item>900</item> + <item>1100</item> + <item>1300</item> + <item>1500</item> + <item>1700</item> + <item>1900</item> + <item>2000</item> + <item>2500</item> + <item>3000</item> + <item>3500</item> + <item>4000</item> + <item>4500</item> + <item>5000</item> + <item>5500</item> + <item>6000</item> + <item>6500</item> + <item>7000</item> + <item>7500</item> + <item>8000</item> + <item>8500</item> + <item>9000</item> + <item>9500</item> + <item>10000</item> + <item>10500</item> + <item>11000</item> + <item>11500</item> + <item>12000</item> + <item>12500</item> + <item>13000</item> + <item>13500</item> + <item>14000</item> + <item>14500</item> + <item>15000</item> + <item>16000</item> + <item>17000</item> + <item>18000</item> + <item>19000</item> + <item>20000</item> + <item>21000</item> + <item>22000</item> + <item>23000</item> + <item>24000</item> + <item>25000</item> + <item>26000</item> + <item>27000</item> + <item>28000</item> + <item>29000</item> + <item>30000</item> + <item>35000</item> + <item>40000</item> + <item>45000</item> + <item>50000</item> + <item>55000</item> + <item>60000</item> + <item>65000</item> + <item>70000</item> + <item>75000</item> + <item>80000</item> + <item>85000</item> + <item>90000</item> + <item>95000</item> + <item>100000</item> + </array> + + <!-- Array of desired screen brightness in nits corresponding to the lux values + in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and + config_screenBrightnessMaximumNits, the display brightness is defined as the measured + brightness of an all-white image. + If this is defined then: + - config_autoBrightnessLcdBacklightValues should not be defined + - config_screenBrightnessNits must be defined + - config_screenBrightnessBacklight must be defined + This array should have size one greater than the size of the config_autoBrightnessLevels + array. The brightness values must be non-negative and non-decreasing. This must be + overridden in platform specific overlays --> + <array name="config_autoBrightnessDisplayValuesNits"> + <item>4.5</item> + <item>6.6</item> + <item>8.0</item> + <item>20.0</item> + <item>24.3</item> + <item>29.7</item> + <item>34.0</item> + <item>46.0</item> + <item>59.0</item> + <item>76.0</item> + <item>81.0</item> + <item>82.0</item> + <item>82.0</item> + <item>82.0</item> + <item>83.0</item> + <item>83.0</item> + <item>83.0</item> + <item>84.0</item> + <item>84.0</item> + <item>85.0</item> + <item>85.0</item> + <item>85.0</item> + <item>85.0</item> + <item>86.0</item> + <item>86.0</item> + <item>87.0</item> + <item>89.0</item> + <item>90.0</item> + <item>91.0</item> + <item>93.0</item> + <item>94.0</item> + <item>96.0</item> + <item>97.0</item> + <item>99.0</item> + <item>100.0</item> + <item>101.0</item> + <item>104.0</item> + <item>105.0</item> + <item>106.0</item> + <item>108.0</item> + <item>109.0</item> + <item>111.0</item> + <item>112.0</item> + <item>114.0</item> + <item>116.0</item> + <item>137.0</item> + <item>157.0</item> + <item>180.0</item> + <item>205.0</item> + <item>226.0</item> + <item>257.0</item> + <item>280.0</item> + <item>295.0</item> + <item>369.0</item> + <item>400.0</item> + <item>416.7</item> + <item>433.3</item> + <item>450.0</item> + <item>466.7</item> + <item>483.3</item> + <item>500.0</item> + <item>512.5</item> + <item>525.0</item> + <item>537.5</item> + <item>550.0</item> + <item>562.5</item> + <item>575.0</item> + <item>587.5</item> + <item>600.0</item> + <item>610.0</item> + <item>620.0</item> + <item>630.0</item> + <item>640.0</item> + <item>650.0</item> + <item>660.0</item> + <item>670.0</item> + <item>680.0</item> + <item>690.0</item> + <item>700.0</item> + <item>705.0</item> + <item>710.0</item> + <item>715.0</item> + <item>720.0</item> + <item>725.0</item> + <item>730.0</item> + <item>735.0</item> + <item>740.0</item> + <item>745.0</item> + <item>750.0</item> + <item>755.0</item> + <item>760.0</item> + <item>765.0</item> + <item>770.0</item> + <item>775.0</item> + <item>800.0</item> + <item>816.7</item> + <item>833.3</item> + <item>850.0</item> + <item>866.7</item> + <item>883.3</item> + <item>900.0</item> + <item>914.3</item> + <item>928.6</item> + <item>942.9</item> + <item>957.1</item> + <item>971.4</item> + <item>985.7</item> + <item>1000.0</item> + </array> + + <!-- An array of floats describing the screen brightness in nits corresponding to the backlight + values in the config_screenBrightnessBacklight array. On OLED displays these values + should be measured with an all white image while the display is in the fully on state. + Note that this value should *not* reflect the maximum brightness value for any high + brightness modes but only the maximum brightness value obtainable in a sustainable manner. + This array should be equal in size to config_screenBrightnessBacklight --> + <array name="config_screenBrightnessNits"> + <item>4.5</item> + <item>1000.0</item> + </array> + + <!-- An array describing the screen's backlight values corresponding to the brightness + values in the config_screenBrightnessNits array. + This array should be equal in size to config_screenBrightnessBacklight. --> + <integer-array name="config_screenBrightnessBacklight"> + <item>1</item> + <item>255</item> + </integer-array> + + <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used + for debouncing the light sensor. Different constants are used to debounce the light sensor + when adapting to brighter or darker environments. This parameter controls how quickly + brightness changes occur in response to an observed change in light level that exceeds the + hysteresis threshold. --> + <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer> + <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer> + + <!-- The maximum range of gamma adjustment possible using the screen + auto-brightness adjustment setting. --> + <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction> + + <!-- Vibrator pattern for feedback about a long screen/key press --> + <integer-array name="config_longPressVibePattern"> + <item>0</item> + <item>10</item> + </integer-array> + + <!-- Vibrator pattern for feedback about touching a virtual key --> + <integer-array name="config_virtualKeyVibePattern"> + <item>0</item> + <item>10</item> + </integer-array> + + <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> + <integer-array name="config_keyboardTapVibePattern"> + <item>10</item> + </integer-array> + + <!-- The bounding path of the cutout region of the main built-in display. + Must either be empty if there is no cutout region, or a string that is parsable by + {@link android.util.PathParser}. + The path is assumed to be specified in display coordinates with pixel units and in + the display's native orientation, with the origin of the coordinate system at the + center top of the display. + To facilitate writing device-independent emulation overlays, the marker `@dp` can be + appended after the path string to interpret coordinates in dp instead of px units. + Note that a physical cutout should be configured in pixels for the best results. + Example for a 10px x 10px square top-center cutout: + <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string> + Example for a 10dp x 10dp square top-center cutout: + <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string> + @see https://www.w3.org/TR/SVG/paths.html#PathData + --> + <string name="config_mainBuiltInDisplayCutout"> + M 25,20 + h -50 + v 80 + h 50 + Z + </string> + + <!-- Whether device has a physical display cutout --> + <bool name="config_physicalDisplayCutout">true</bool> + + <!-- The default refresh rate. Apollo manages this using the peak refresh rate setting, so set + this value to 0 so it has no effect. --> + <integer name="config_defaultRefreshRate">0</integer> + + <!-- The default peak refresh rate. --> + <integer name="config_defaultPeakRefreshRate">120</integer> + + <!-- If true, the display will be shifted around in ambient mode. --> + <bool name="config_enableBurnInProtection">true</bool> + + <!-- Indicates whether device has a power button fingerprint sensor. --> + <bool name="config_is_powerbutton_fps" translatable="false" >true</bool> + + <!-- An array of arrays of side fingerprint sensor properties relative to each display. + Note: this value is temporary and is expected to be queried directly + from the HAL in the future. --> + <array name="config_sfps_sensor_props" translatable="false"> + <item>@array/config_sfps_sensor_props_0</item> + </array> + + <array name="config_sfps_sensor_props_0" translatable="false"> + <item></item> <!--item>displayId</item--> + <item>1080</item> <!--item>sensorLocationX</item--> + <item>920</item> <!--item>sensorLocationY</item--> + <item>200</item> <!--item>sensorRadius</item--> + </array> + + <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> + <bool name="config_unplugTurnsOnScreen">true</bool> + + <!-- Boolean indicating if restoring network selection should be skipped --> + <!-- The restoring is handled by modem if it is true--> + <bool translatable="false" name="skip_restoring_network_selection">true</bool> + + <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> + <bool name="config_cellBroadcastAppLinks">true</bool> + + <!-- MMS user agent string --> + <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string> + + <!-- This string array should be overridden by the device to present a list of network + attributes. This is used by the connectivity manager to decide which networks can coexist + based on the hardware --> + <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], + [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> + <!-- the 5th element "resore-time" indicates the number of milliseconds to delay + before automatically restore the default connection. Set -1 if the connection + does not require auto-restore. --> + <!-- the 6th element indicates boot-time dependency-met value. --> + <string-array name="networkAttributes"> + <item>wifi,1,1,1,-1,true</item> + <item>mobile,0,0,0,-1,true</item> + <item>mobile_mms,2,0,4,60000,true</item> + <item>mobile_supl,3,0,2,60000,true</item> + <item>mobile_dun,4,0,2,60000,true</item> + <item>mobile_hipri,5,0,3,60000,true</item> + <item>mobile_fota,10,0,2,60000,true</item> + <item>mobile_ims,11,0,2,60000,true</item> + <item>mobile_cbs,12,0,2,60000,true</item> + <item>bluetooth,7,7,2,-1,true</item> + <item>mobile_emergency,15,0,5,-1,true</item> + <item>ethernet,9,9,9,-1,true</item> + </string-array> + + <!-- This string array should be overridden by the device to present a list of radio + attributes. This is used by the connectivity manager to decide which networks can coexist + based on the hardware --> + <!-- An Array of "[ConnectivityManager connectionType], + [# simultaneous connection types]" --> + <string-array name="radioAttributes"> + <item>1,1</item> + <item>0,1</item> + <item>7,1</item> + </string-array> + + <!-- Whether WiFi display is supported by this device. + There are many prerequisites for this feature to work correctly. + Here are a few of them: + * The WiFi radio must support WiFi P2P. + * The WiFi radio must support concurrent connections to the WiFi display and + to an access point. + * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix" + remote submix module. This module is used to record and stream system + audio output to the WiFi display encoder in the media server. + * The remote submix module "audio.r_submix.default" must be installed on the device. + * The device must be provisioned with HDCP keys (for protected content). + --> + <bool name="config_enableWifiDisplay">true</bool> + + <!-- Set to true if the wifi display supports compositing content stored + in gralloc protected buffers. For this to be true, there must exist + a protected hardware path for surface flinger to composite and send + protected buffers to the wifi display video encoder. + If this flag is false, we advise applications not to use protected + buffers (if possible) when presenting content to a wifi display because + the content may be blanked. + This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS} + flag is set for wifi displays. + --> + <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool> + + <!-- Indicate whether closing the lid causes the device to go to sleep and opening + it causes the device to wake up. + The default is false. --> + <bool name="config_lidControlsSleep">true</bool> + + <!-- ComponentName of a dream to show whenever the system would otherwise have + gone to sleep. When the PowerManager is asked to go to sleep, it will instead + try to start this dream if possible. The dream should typically call startDozing() + to put the display into a low power state and allow the application processor + to be suspended. When the dream ends, the system will go to sleep as usual. + Specify the component name or an empty string if none. + Note that doze dreams are not subject to the same start conditions as ordinary dreams. + Doze dreams will run whenever the power manager is in a dozing state. --> + <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> + + <!-- If true, the doze component is not started until after the screen has been + turned off and the screen off animation has been performed. --> + <bool name="config_dozeAfterScreenOffByDefault">true</bool> + + <!-- Power Management: Specifies whether to decouple the interactive state of the + device from the display on/off state. + When false, setInteractive(..., true) will be called before the display is turned on + and setInteractive(..., false) will be called after the display is turned off. + This mode provides best compatibility for devices that expect the interactive + state to be tied to the display state. + When true, setInteractive(...) will be called independently of whether the display + is being turned on or off. This mode enables the power manager to reduce + clocks and disable the touch controller while the display is on. + This resource should be set to "true" when a doze component has been specified + to maximize power savings but not all devices support it. + Refer to power.h for details. + --> + <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> + + <!-- Enable doze alwaysOn Display --> + <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool> + + <!-- Control whether the always on display mode is enabled by default. This value will be used + during initialization when the setting is still null. --> + <bool name="config_dozeAlwaysOnEnabled">false</bool> + + <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. --> + <bool name="config_dozePulsePickup">true</bool> + + <!-- True if the display hardware only has brightness buckets rather than a full range of + backlight values --> + <bool name="config_displayBrightnessBucketsInDoze">true</bool> + + <!-- Screen brightness used to dim the screen while dozing in a very low power state. + May be less than the minimum allowed brightness setting + that can be set by the user. --> + <integer name="config_screenBrightnessDoze">17</integer> + + <!-- Configure mobile tcp buffer sizes in the form: + rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max + If no value is found for the rat-name in use, the system default will be applied. + --> + <string-array name="config_mobile_tcp_buffers"> + <item>5gnr:2097152,6291456,16777216,512000,2097152,8388608</item> + <item>lte:2097152,4194304,8388608,262144,524288,1048576</item> + <item>lte_ca:4096,6291456,12582912,4096,1048576,2097152</item> + <item>umts:4094,87380,1220608,4096,16384,1220608</item> + <item>hspa:4094,87380,1220608,4096,16384,1220608</item> + <item>hsupa:4094,87380,1220608,4096,16384,1220608</item> + <item>hsdpa:4094,87380,1220608,4096,16384,1220608</item> + <item>hspap:4094,87380,1220608,4096,16384,1220608</item> + <item>edge:4093,26280,35040,4096,16384,35040</item> + <item>gprs:4092,8760,11680,4096,8760,11680</item> + <item>evdo:4094,87380,524288,4096,16384,262144</item> + </string-array> + + <!-- Flag specifying whether VoLTE is available on device --> + <bool name="config_device_volte_available">true</bool> + + <!-- Flag specifying whether VT is available on device --> + <bool name="config_device_vt_available">true</bool> + + <!-- Flag specifying whether WFC over IMS is available on device --> + <bool name="config_device_wfc_ims_available">true</bool> + + <!-- IWLAN data service package name to bind to by default. If none is specified in an overlay, an + empty string is passed in --> + <string name="config_wlan_data_service_package">vendor.qti.iwlan</string> + + <!-- IWLAN network service package name to bind to by default. If none is specified in an overlay, an + empty string is passed in --> + <string name="config_wlan_network_service_package">vendor.qti.iwlan</string> + + <!-- Telephony qualified networks service package name to bind to by default. --> + <string name="config_qualified_networks_service_package">vendor.qti.iwlan</string> + + <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically --> + <bool name="config_dynamic_bind_ims">true</bool> + + <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently + in hardware. --> + <bool name="config_setColorTransformAccelerated">true</bool> + + <!-- Is the device capable of hot swapping an ICC Card --> + <bool name="config_hotswapCapable">true</bool> + + <!-- Whether the Unprocessed audio source supports the required frequency range and level --> + <bool name="config_supportAudioSourceUnprocessed">true</bool> + + <!-- Idle current for bluetooth controller. 0 by default--> + <integer name="config_bluetooth_idle_cur_ma">3</integer> + + <!-- Rx current for bluetooth controller. 0 by default--> + <integer name="config_bluetooth_rx_cur_ma">20</integer> + + <!-- Tx current for bluetooth controller. 0 by default--> + <integer name="config_bluetooth_tx_cur_ma">36</integer> + + <!-- Operating volatage for bluetooth controller. 0 by default--> + <integer name="config_bluetooth_operating_voltage_mv">3700</integer> + + <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and + is not necessarily the same as the number of phones/logical modems supported by the device. + For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots, + or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM + and one pSIM) --> + <integer name="config_num_physical_slots">2</integer> + + <!-- Config determines whether to update phone object when voice registration + state changes. Voice radio tech change will always trigger an update of + phone object irrespective of this config --> + <bool name="config_switch_phone_on_voice_reg_state_change">false</bool> + + <!-- Boolean indicating if current platform supports BLE peripheral mode --> + <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool> + + <!-- Boolean indicating if current platform supports HFP inband ringing --> + <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool> + + <!-- Flag indicating if the speed up audio on mt call code should be executed --> + <bool name="config_speed_up_audio_on_mt_calls">true</bool> + + <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> + <integer name="config_shutdownBatteryTemperature">600</integer> + + <!-- Default list of files pinned by the Pinner Service --> + <string-array translatable="false" name="config_defaultPinnerServiceFiles"> + <item>"/system/framework/framework.jar"</item> + <item>"/system/framework/services.jar"</item> + <item>"/apex/com.android.art/javalib/core-oj.jar"</item> + <item>"/apex/com.android.art/javalib/core-libart.jar"</item> + <item>"/apex/com.android.media/javalib/updatable-media.jar"</item> + <item>"/system_ext/priv-app/SystemUI/SystemUI.apk"</item> + <item>"/system/bin/surfaceflinger"</item> + </string-array> + + <!-- Should the pinner service pin the Home application? --> + <bool name="config_pinnerHomeApp">true</bool> + + <!-- List of files pinned by the Pinner Service with the JIT Zygote boot image b/119800099 --> + <string-array translatable="false" name="config_jitzygoteBootImagePinnerServiceFiles"> + <item>"/system/framework/framework.jar"</item> + <item>"/system/framework/services.jar"</item> + <item>"/apex/com.android.art/javalib/core-oj.jar"</item> + <item>"/apex/com.android.art/javalib/core-libart.jar"</item> + <item>"/apex/com.android.media/javalib/updatable-media.jar"</item> + <item>"/system_ext/priv-app/SystemUI/SystemUI.apk"</item> + <item>"/system/bin/surfaceflinger"</item> + </string-array> + + <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be + autodetected from the Configuration. --> + <bool name="config_showNavigationBar">true</bool> + + <!-- When true use the linux /dev/input/event subsystem to detect the switch changes + on the headphone/microphone jack. When false use the older uevent framework. --> + <bool name="config_useDevInputEventForAudioJack">true</bool> + + <!-- Whether device supports double tap to wake --> + <bool name="config_supportDoubleTapWake">true</bool> + + <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService + when registering authenticators with BiometricService. Format must be ID:Modality:Strength, + where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java, + and Strength as defined in Authenticators.java --> + <string-array name="config_biometric_sensors" translatable="false" > + <item>0:2:15</item> <!-- ID0:Fingerprint:Strong --> + </string-array> + + <!-- Enables or disables haptic effect when the text insertion/selection handle is moved + manually by the user. Off by default, since the expected haptic feedback may not be + available on some devices. --> + <bool name="config_enableHapticTextHandle">true</bool> + +</resources>
\ No newline at end of file diff --git a/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml b/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml new file mode 100644 index 0000000..c201db8 --- /dev/null +++ b/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml @@ -0,0 +1,20 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2009 The Android Open Source Project + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + + <dimen name="rounded_corner_content_padding">47.0px</dimen> + <dimen name="rounded_corner_radius">102.0px</dimen> + <dimen name="status_bar_height_portrait">110.0px</dimen> + +</resources>
\ No newline at end of file diff --git a/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml b/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml new file mode 100644 index 0000000..bc60d86 --- /dev/null +++ b/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml @@ -0,0 +1,111 @@ +<?xml version="1.0" encoding="utf-8"?> +<device name="Android"> + <item name="ambient.on">0.1</item> + <item name="screen.on">100.2</item> + <item name="screen.full">208</item> + <item name="bluetooth.active">9</item> + <item name="bluetooth.on">0.47</item> + <item name="wifi.on">0.32</item> + <item name="wifi.active">148</item> + <item name="wifi.scan">25</item> + <item name="audio">13.6</item> + <item name="video">57</item> + <item name="camera.flashlight">86</item> + <item name="camera.avg">616</item> + <item name="gps.on">45</item> + <item name="radio.active">217</item> + <item name="radio.scanning">47</item> + <array name="radio.on"> + <value>2.82</value> + <value>1.82</value> + </array> + <array name="cpu.active"> + <value>0.1</value> + </array> + <array name="cpu.clusters.cores"> + <value>6</value> + <value>2</value> + </array> + <array name="cpu.core_speeds.cluster0"> + <value>300000</value> + <value>576000</value> + <value>710400</value> + <value>940800</value> + <value>1190400</value> + <value>1324800</value> + <value>1478400</value> + <value>1574400</value> + <value>1708800</value> + <value>1804800</value> + </array> + <array name="cpu.core_speeds.cluster1"> + <value>691200</value> + <value>940800</value> + <value>1228800</value> + <value>1401600</value> + <value>1516800</value> + <value>1651200</value> + <value>1804800</value> + <value>1900800</value> + <value>2054400</value> + <value>2208000</value> + </array> + <array name="cpu.core_power.cluster0"> + <value>35</value> + <value>39</value> + <value>46</value> + <value>65</value> + <value>86</value> + <value>105</value> + <value>117</value> + <value>172</value> + <value>187</value> + <value>208</value> + </array> + <array name="cpu.core_power.cluster1"> + <value>91</value> + <value>91</value> + <value>146</value> + <value>190</value> + <value>215</value> + <value>257</value> + <value>322</value> + <value>366</value> + <value>421</value> + <value>526</value> + </array> + <item name="cpu.idle">4.78</item> + <array name="memory.bandwidths"> + <value>22.7</value> + </array> + <item name="battery.capacity">5000</item> + <item name="battery.typical">5000</item> + <item name="wifi.controller.idle">1.4</item> + <item name="wifi.controller.rx">177</item> + <item name="wifi.controller.tx">269</item> + <array name="wifi.controller.tx_levels" /> + <item name="wifi.controller.voltage">3300</item> + <array name="wifi.batchedscan"> + <value>.0002</value> + <value>.002</value> + <value>.02</value> + <value>.2</value> + <value>2</value> + </array> + <item name="modem.controller.sleep">0</item> + <item name="modem.controller.idle">1</item> + <item name="modem.controller.rx">200</item> + <array name="modem.controller.tx"> + <value>293</value> + <value>296</value> + <value>316</value> + <value>401</value> + <value>506</value> + </array> + <item name="modem.controller.voltage">800</item> + <array name="gps.signalqualitybased"> + <value>0</value> + <value>0</value> + </array> + <item name="gps.voltage">0</item> +</device>
\ No newline at end of file |