From 74f36a177a61de03c420facaa30fa5aea155979c Mon Sep 17 00:00:00 2001
From: kleidione Freitas <kleidione@gmail.com>
Date: Fri, 1 Jul 2022 18:05:25 -0300
Subject: veux: overlay: Rebrand and import veux config

Signed-off-by: kleidione <kleidione@gmail.com>
---
 .../FrameworksResOverlayVeux/res/values/config.xml | 634 +++++++++++++++++++++
 .../FrameworksResOverlayVeux/res/values/dimens.xml |  20 +
 .../res/xml/power_profile.xml                      | 111 ++++
 3 files changed, 765 insertions(+)
 create mode 100644 rro_overlays/FrameworksResOverlayVeux/res/values/config.xml
 create mode 100644 rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml
 create mode 100644 rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml

(limited to 'rro_overlays/FrameworksResOverlayVeux/res')

diff --git a/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml b/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml
new file mode 100644
index 0000000..b2c7751
--- /dev/null
+++ b/rro_overlays/FrameworksResOverlayVeux/res/values/config.xml
@@ -0,0 +1,634 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
+         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
+    <bool name="config_automatic_brightness_available">true</bool>
+
+    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 control points as follows:
+         (1-based arrays)
+         Point 1:            (0, value[1]):             lux <= 0
+         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
+         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
+         ...
+         Point N+1: (level[N], value[N+1]):  level[N] < lux
+         The control points must be strictly increasing.  Each control point
+         corresponds to an entry in the brightness backlight values arrays.
+         For example, if lux == level[1] (first element of the levels array)
+         then the brightness will be determined by value[2] (second element
+         of the brightness values array).
+         Spline interpolation is used to determine the auto-brightness
+         backlight values for lux levels between these control points.
+         Must be overridden in platform specific overlays -->
+    <array name="config_autoBrightnessLevels">
+        <item>1</item>
+        <item>2</item>
+        <item>4</item>
+        <item>6</item>
+        <item>8</item>
+        <item>10</item>
+        <item>15</item>
+        <item>20</item>
+        <item>25</item>
+        <item>30</item>
+        <item>35</item>
+        <item>40</item>
+        <item>45</item>
+        <item>50</item>
+        <item>55</item>
+        <item>60</item>
+        <item>65</item>
+        <item>70</item>
+        <item>75</item>
+        <item>80</item>
+        <item>85</item>
+        <item>90</item>
+        <item>95</item>
+        <item>100</item>
+        <item>120</item>
+        <item>140</item>
+        <item>160</item>
+        <item>180</item>
+        <item>200</item>
+        <item>220</item>
+        <item>240</item>
+        <item>260</item>
+        <item>280</item>
+        <item>300</item>
+        <item>320</item>
+        <item>340</item>
+        <item>360</item>
+        <item>380</item>
+        <item>400</item>
+        <item>420</item>
+        <item>440</item>
+        <item>460</item>
+        <item>480</item>
+        <item>500</item>
+        <item>700</item>
+        <item>900</item>
+        <item>1100</item>
+        <item>1300</item>
+        <item>1500</item>
+        <item>1700</item>
+        <item>1900</item>
+        <item>2000</item>
+        <item>2500</item>
+        <item>3000</item>
+        <item>3500</item>
+        <item>4000</item>
+        <item>4500</item>
+        <item>5000</item>
+        <item>5500</item>
+        <item>6000</item>
+        <item>6500</item>
+        <item>7000</item>
+        <item>7500</item>
+        <item>8000</item>
+        <item>8500</item>
+        <item>9000</item>
+        <item>9500</item>
+        <item>10000</item>
+        <item>10500</item>
+        <item>11000</item>
+        <item>11500</item>
+        <item>12000</item>
+        <item>12500</item>
+        <item>13000</item>
+        <item>13500</item>
+        <item>14000</item>
+        <item>14500</item>
+        <item>15000</item>
+        <item>16000</item>
+        <item>17000</item>
+        <item>18000</item>
+        <item>19000</item>
+        <item>20000</item>
+        <item>21000</item>
+        <item>22000</item>
+        <item>23000</item>
+        <item>24000</item>
+        <item>25000</item>
+        <item>26000</item>
+        <item>27000</item>
+        <item>28000</item>
+        <item>29000</item>
+        <item>30000</item>
+        <item>35000</item>
+        <item>40000</item>
+        <item>45000</item>
+        <item>50000</item>
+        <item>55000</item>
+        <item>60000</item>
+        <item>65000</item>
+        <item>70000</item>
+        <item>75000</item>
+        <item>80000</item>
+        <item>85000</item>
+        <item>90000</item>
+        <item>95000</item>
+        <item>100000</item>
+    </array>
+
+    <!-- Array of desired screen brightness in nits corresponding to the lux values
+         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
+         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
+         brightness of an all-white image.
+         If this is defined then:
+            - config_autoBrightnessLcdBacklightValues should not be defined
+            - config_screenBrightnessNits must be defined
+            - config_screenBrightnessBacklight must be defined
+         This array should have size one greater than the size of the config_autoBrightnessLevels
+         array. The brightness values must be non-negative and non-decreasing. This must be
+         overridden in platform specific overlays -->
+    <array name="config_autoBrightnessDisplayValuesNits">
+        <item>4.5</item>
+        <item>6.6</item>
+        <item>8.0</item>
+        <item>20.0</item>
+        <item>24.3</item>
+        <item>29.7</item>
+        <item>34.0</item>
+        <item>46.0</item>
+        <item>59.0</item>
+        <item>76.0</item>
+        <item>81.0</item>
+        <item>82.0</item>
+        <item>82.0</item>
+        <item>82.0</item>
+        <item>83.0</item>
+        <item>83.0</item>
+        <item>83.0</item>
+        <item>84.0</item>
+        <item>84.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>86.0</item>
+        <item>86.0</item>
+        <item>87.0</item>
+        <item>89.0</item>
+        <item>90.0</item>
+        <item>91.0</item>
+        <item>93.0</item>
+        <item>94.0</item>
+        <item>96.0</item>
+        <item>97.0</item>
+        <item>99.0</item>
+        <item>100.0</item>
+        <item>101.0</item>
+        <item>104.0</item>
+        <item>105.0</item>
+        <item>106.0</item>
+        <item>108.0</item>
+        <item>109.0</item>
+        <item>111.0</item>
+        <item>112.0</item>
+        <item>114.0</item>
+        <item>116.0</item>
+        <item>137.0</item>
+        <item>157.0</item>
+        <item>180.0</item>
+        <item>205.0</item>
+        <item>226.0</item>
+        <item>257.0</item>
+        <item>280.0</item>
+        <item>295.0</item>
+        <item>369.0</item>
+        <item>400.0</item>
+        <item>416.7</item>
+        <item>433.3</item>
+        <item>450.0</item>
+        <item>466.7</item>
+        <item>483.3</item>
+        <item>500.0</item>
+        <item>512.5</item>
+        <item>525.0</item>
+        <item>537.5</item>
+        <item>550.0</item>
+        <item>562.5</item>
+        <item>575.0</item>
+        <item>587.5</item>
+        <item>600.0</item>
+        <item>610.0</item>
+        <item>620.0</item>
+        <item>630.0</item>
+        <item>640.0</item>
+        <item>650.0</item>
+        <item>660.0</item>
+        <item>670.0</item>
+        <item>680.0</item>
+        <item>690.0</item>
+        <item>700.0</item>
+        <item>705.0</item>
+        <item>710.0</item>
+        <item>715.0</item>
+        <item>720.0</item>
+        <item>725.0</item>
+        <item>730.0</item>
+        <item>735.0</item>
+        <item>740.0</item>
+        <item>745.0</item>
+        <item>750.0</item>
+        <item>755.0</item>
+        <item>760.0</item>
+        <item>765.0</item>
+        <item>770.0</item>
+        <item>775.0</item>
+        <item>800.0</item>
+        <item>816.7</item>
+        <item>833.3</item>
+        <item>850.0</item>
+        <item>866.7</item>
+        <item>883.3</item>
+        <item>900.0</item>
+        <item>914.3</item>
+        <item>928.6</item>
+        <item>942.9</item>
+        <item>957.1</item>
+        <item>971.4</item>
+        <item>985.7</item>
+        <item>1000.0</item>
+    </array>
+
+    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
+         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
+         should be measured with an all white image while the display is in the fully on state.
+         Note that this value should *not* reflect the maximum brightness value for any high
+         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
+         This array should be equal in size to config_screenBrightnessBacklight -->
+    <array name="config_screenBrightnessNits">
+        <item>4.5</item>
+        <item>1000.0</item>
+    </array>
+
+    <!-- An array describing the screen's backlight values corresponding to the brightness
+         values in the config_screenBrightnessNits array.
+         This array should be equal in size to config_screenBrightnessBacklight. -->
+    <integer-array name="config_screenBrightnessBacklight">
+        <item>1</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
+
+    <!-- The maximum range of gamma adjustment possible using the screen
+         auto-brightness adjustment setting. -->
+    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
+
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>10</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>10</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
+    <integer-array name="config_keyboardTapVibePattern">
+        <item>10</item>
+    </integer-array>
+
+    <!-- The bounding path of the cutout region of the main built-in display.
+         Must either be empty if there is no cutout region, or a string that is parsable by
+         {@link android.util.PathParser}.
+         The path is assumed to be specified in display coordinates with pixel units and in
+         the display's native orientation, with the origin of the coordinate system at the
+         center top of the display.
+         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
+         appended after the path string to interpret coordinates in dp instead of px units.
+         Note that a physical cutout should be configured in pixels for the best results.
+         Example for a 10px x 10px square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
+         Example for a 10dp x 10dp square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
+         @see https://www.w3.org/TR/SVG/paths.html#PathData
+         -->
+    <string name="config_mainBuiltInDisplayCutout">
+        M 25,20
+        h -50
+        v 80
+        h 50
+        Z
+    </string>
+
+    <!-- Whether device has a physical display cutout -->
+    <bool name="config_physicalDisplayCutout">true</bool>
+
+    <!-- The default refresh rate. Apollo manages this using the peak refresh rate setting, so set
+         this value to 0 so it has no effect. -->
+    <integer name="config_defaultRefreshRate">0</integer>
+
+    <!-- The default peak refresh rate. -->
+    <integer name="config_defaultPeakRefreshRate">120</integer>
+ 
+    <!-- If true, the display will be shifted around in ambient mode. -->
+    <bool name="config_enableBurnInProtection">true</bool>
+
+    <!-- Indicates whether device has a power button fingerprint sensor. -->
+    <bool name="config_is_powerbutton_fps" translatable="false" >true</bool>
+
+    <!-- An array of arrays of side fingerprint sensor properties relative to each display.
+         Note: this value is temporary and is expected to be queried directly
+         from the HAL in the future. -->
+    <array name="config_sfps_sensor_props" translatable="false">
+        <item>@array/config_sfps_sensor_props_0</item>
+    </array>
+
+    <array name="config_sfps_sensor_props_0" translatable="false">
+        <item></item> <!--item>displayId</item-->
+        <item>1080</item> <!--item>sensorLocationX</item-->
+        <item>920</item> <!--item>sensorLocationY</item-->
+        <item>200</item> <!--item>sensorRadius</item-->
+    </array>
+
+    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
+    <bool name="config_unplugTurnsOnScreen">true</bool>
+
+    <!-- Boolean indicating if restoring network selection should be skipped -->
+    <!-- The restoring is handled by modem if it is true-->
+    <bool translatable="false" name="skip_restoring_network_selection">true</bool>
+
+    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
+    <bool name="config_cellBroadcastAppLinks">true</bool>
+
+    <!-- MMS user agent string -->
+    <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string>
+
+     <!-- This string array should be overridden by the device to present a list of network
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array name="networkAttributes">
+        <item>wifi,1,1,1,-1,true</item>
+        <item>mobile,0,0,0,-1,true</item>
+        <item>mobile_mms,2,0,4,60000,true</item>
+        <item>mobile_supl,3,0,2,60000,true</item>
+        <item>mobile_dun,4,0,2,60000,true</item>
+        <item>mobile_hipri,5,0,3,60000,true</item>
+        <item>mobile_fota,10,0,2,60000,true</item>
+        <item>mobile_ims,11,0,2,60000,true</item>
+        <item>mobile_cbs,12,0,2,60000,true</item>
+        <item>bluetooth,7,7,2,-1,true</item>
+        <item>mobile_emergency,15,0,5,-1,true</item>
+        <item>ethernet,9,9,9,-1,true</item>
+    </string-array>
+
+    <!-- This string array should be overridden by the device to present a list of radio
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[ConnectivityManager connectionType],
+                      [# simultaneous connection types]"  -->
+    <string-array name="radioAttributes">
+        <item>1,1</item>
+        <item>0,1</item>
+        <item>7,1</item>
+    </string-array>
+
+    <!-- Whether WiFi display is supported by this device.
+         There are many prerequisites for this feature to work correctly.
+         Here are a few of them:
+         * The WiFi radio must support WiFi P2P.
+         * The WiFi radio must support concurrent connections to the WiFi display and
+           to an access point.
+         * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix"
+           remote submix module.  This module is used to record and stream system
+           audio output to the WiFi display encoder in the media server.
+         * The remote submix module "audio.r_submix.default" must be installed on the device.
+         * The device must be provisioned with HDCP keys (for protected content).
+    -->
+    <bool name="config_enableWifiDisplay">true</bool>
+
+    <!-- Set to true if the wifi display supports compositing content stored
+         in gralloc protected buffers.  For this to be true, there must exist
+         a protected hardware path for surface flinger to composite and send
+         protected buffers to the wifi display video encoder.
+         If this flag is false, we advise applications not to use protected
+         buffers (if possible) when presenting content to a wifi display because
+         the content may be blanked.
+         This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS}
+         flag is set for wifi displays.
+    -->
+    <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool>
+
+    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
+         it causes the device to wake up.
+         The default is false. -->
+    <bool name="config_lidControlsSleep">true</bool>
+
+    <!-- ComponentName of a dream to show whenever the system would otherwise have
+         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
+         try to start this dream if possible.  The dream should typically call startDozing()
+         to put the display into a low power state and allow the application processor
+         to be suspended.  When the dream ends, the system will go to sleep as usual.
+         Specify the component name or an empty string if none.
+         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
+         Doze dreams will run whenever the power manager is in a dozing state. -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- If true, the doze component is not started until after the screen has been
+         turned off and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOffByDefault">true</bool>
+
+    <!-- Power Management: Specifies whether to decouple the interactive state of the
+         device from the display on/off state.
+         When false, setInteractive(..., true) will be called before the display is turned on
+         and setInteractive(..., false) will be called after the display is turned off.
+         This mode provides best compatibility for devices that expect the interactive
+         state to be tied to the display state.
+         When true, setInteractive(...) will be called independently of whether the display
+         is being turned on or off.  This mode enables the power manager to reduce
+         clocks and disable the touch controller while the display is on.
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+         Refer to power.h for details.
+    -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Enable doze alwaysOn Display -->
+    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+
+    <!-- Control whether the always on display mode is enabled by default. This value will be used
+         during initialization when the setting is still null. -->
+    <bool name="config_dozeAlwaysOnEnabled">false</bool>
+
+    <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
+    <bool name="config_dozePulsePickup">true</bool>
+
+    <!-- True if the display hardware only has brightness buckets rather than a full range of
+         backlight values -->
+    <bool name="config_displayBrightnessBucketsInDoze">true</bool>
+
+    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
+         May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDoze">17</integer>
+
+    <!-- Configure mobile tcp buffer sizes in the form:
+         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
+         If no value is found for the rat-name in use, the system default will be applied.
+    -->
+    <string-array name="config_mobile_tcp_buffers">
+        <item>5gnr:2097152,6291456,16777216,512000,2097152,8388608</item>
+        <item>lte:2097152,4194304,8388608,262144,524288,1048576</item>
+        <item>lte_ca:4096,6291456,12582912,4096,1048576,2097152</item>
+        <item>umts:4094,87380,1220608,4096,16384,1220608</item>
+        <item>hspa:4094,87380,1220608,4096,16384,1220608</item>
+        <item>hsupa:4094,87380,1220608,4096,16384,1220608</item>
+        <item>hsdpa:4094,87380,1220608,4096,16384,1220608</item>
+        <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
+        <item>edge:4093,26280,35040,4096,16384,35040</item>
+        <item>gprs:4092,8760,11680,4096,8760,11680</item>
+        <item>evdo:4094,87380,524288,4096,16384,262144</item>
+    </string-array>
+
+    <!-- Flag specifying whether VoLTE is available on device -->
+    <bool name="config_device_volte_available">true</bool>
+
+    <!-- Flag specifying whether VT is available on device -->
+    <bool name="config_device_vt_available">true</bool>
+
+    <!-- Flag specifying whether WFC over IMS is available on device -->
+    <bool name="config_device_wfc_ims_available">true</bool>
+
+    <!-- IWLAN data service package name to bind to by default. If none is specified in an overlay, an
+         empty string is passed in -->
+    <string name="config_wlan_data_service_package">vendor.qti.iwlan</string>
+
+    <!-- IWLAN network service package name to bind to by default. If none is specified in an overlay, an
+         empty string is passed in -->
+    <string name="config_wlan_network_service_package">vendor.qti.iwlan</string>
+
+    <!-- Telephony qualified networks service package name to bind to by default. -->
+    <string name="config_qualified_networks_service_package">vendor.qti.iwlan</string>
+
+    <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
+    <bool name="config_dynamic_bind_ims">true</bool>
+
+    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
+         in hardware. -->
+    <bool name="config_setColorTransformAccelerated">true</bool>
+
+    <!-- Is the device capable of hot swapping an ICC Card -->
+    <bool name="config_hotswapCapable">true</bool>
+
+    <!-- Whether the Unprocessed audio source supports the required frequency range and level -->
+    <bool name="config_supportAudioSourceUnprocessed">true</bool>
+
+    <!-- Idle current for bluetooth controller. 0 by default-->
+    <integer name="config_bluetooth_idle_cur_ma">3</integer>
+
+    <!-- Rx current for bluetooth controller. 0 by default-->
+    <integer name="config_bluetooth_rx_cur_ma">20</integer>
+
+    <!-- Tx current for bluetooth controller. 0 by default-->
+    <integer name="config_bluetooth_tx_cur_ma">36</integer>
+
+    <!-- Operating volatage for bluetooth controller. 0 by default-->
+    <integer name="config_bluetooth_operating_voltage_mv">3700</integer>
+
+    <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and
+         is not necessarily the same as the number of phones/logical modems supported by the device.
+         For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots,
+         or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM
+         and one pSIM) -->
+    <integer name="config_num_physical_slots">2</integer>
+
+    <!-- Config determines whether to update phone object when voice registration
+         state changes. Voice radio tech change will always trigger an update of
+         phone object irrespective of this config -->
+    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>
+
+    <!-- Boolean indicating if current platform supports BLE peripheral mode -->
+    <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>
+
+    <!-- Boolean indicating if current platform supports HFP inband ringing -->
+    <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>
+
+    <!-- Flag indicating if the speed up audio on mt call code should be executed -->
+    <bool name="config_speed_up_audio_on_mt_calls">true</bool>
+
+    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
+    <integer name="config_shutdownBatteryTemperature">600</integer>
+
+    <!-- Default list of files pinned by the Pinner Service -->
+    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+        <item>"/system/framework/framework.jar"</item>
+        <item>"/system/framework/services.jar"</item>
+        <item>"/apex/com.android.art/javalib/core-oj.jar"</item>
+        <item>"/apex/com.android.art/javalib/core-libart.jar"</item>
+        <item>"/apex/com.android.media/javalib/updatable-media.jar"</item>
+        <item>"/system_ext/priv-app/SystemUI/SystemUI.apk"</item>
+        <item>"/system/bin/surfaceflinger"</item>
+    </string-array>
+
+    <!-- Should the pinner service pin the Home application? -->
+    <bool name="config_pinnerHomeApp">true</bool>
+
+    <!-- List of files pinned by the Pinner Service with the JIT Zygote boot image b/119800099 -->
+    <string-array translatable="false" name="config_jitzygoteBootImagePinnerServiceFiles">
+        <item>"/system/framework/framework.jar"</item>
+        <item>"/system/framework/services.jar"</item>
+        <item>"/apex/com.android.art/javalib/core-oj.jar"</item>
+        <item>"/apex/com.android.art/javalib/core-libart.jar"</item>
+        <item>"/apex/com.android.media/javalib/updatable-media.jar"</item>
+        <item>"/system_ext/priv-app/SystemUI/SystemUI.apk"</item>
+        <item>"/system/bin/surfaceflinger"</item>
+    </string-array>
+
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">true</bool>
+
+    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
+         on the headphone/microphone jack. When false use the older uevent framework. -->
+    <bool name="config_useDevInputEventForAudioJack">true</bool>
+
+    <!-- Whether device supports double tap to wake -->
+    <bool name="config_supportDoubleTapWake">true</bool>
+
+    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
+         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
+         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
+         and Strength as defined in Authenticators.java -->
+    <string-array name="config_biometric_sensors" translatable="false" >
+        <item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
+    </string-array>
+
+    <!-- Enables or disables haptic effect when the text insertion/selection handle is moved
+         manually by the user. Off by default, since the expected haptic feedback may not be
+         available on some devices. -->
+    <bool name="config_enableHapticTextHandle">true</bool>
+
+</resources>
\ No newline at end of file
diff --git a/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml b/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml
new file mode 100644
index 0000000..c201db8
--- /dev/null
+++ b/rro_overlays/FrameworksResOverlayVeux/res/values/dimens.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <dimen name="rounded_corner_content_padding">47.0px</dimen>
+    <dimen name="rounded_corner_radius">102.0px</dimen>
+    <dimen name="status_bar_height_portrait">110.0px</dimen>
+
+</resources>
\ No newline at end of file
diff --git a/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml b/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml
new file mode 100644
index 0000000..bc60d86
--- /dev/null
+++ b/rro_overlays/FrameworksResOverlayVeux/res/xml/power_profile.xml
@@ -0,0 +1,111 @@
+<?xml version="1.0" encoding="utf-8"?>
+<device name="Android">
+    <item name="ambient.on">0.1</item>
+    <item name="screen.on">100.2</item>
+    <item name="screen.full">208</item>
+    <item name="bluetooth.active">9</item>
+    <item name="bluetooth.on">0.47</item>
+    <item name="wifi.on">0.32</item>
+    <item name="wifi.active">148</item>
+    <item name="wifi.scan">25</item>
+    <item name="audio">13.6</item>
+    <item name="video">57</item>
+    <item name="camera.flashlight">86</item>
+    <item name="camera.avg">616</item>
+    <item name="gps.on">45</item>
+    <item name="radio.active">217</item>
+    <item name="radio.scanning">47</item>
+    <array name="radio.on">
+        <value>2.82</value>
+        <value>1.82</value>
+    </array>
+    <array name="cpu.active">
+        <value>0.1</value>
+    </array>
+    <array name="cpu.clusters.cores">
+        <value>6</value>
+        <value>2</value>
+    </array>
+    <array name="cpu.core_speeds.cluster0">
+        <value>300000</value>
+        <value>576000</value>
+        <value>710400</value>
+        <value>940800</value>
+        <value>1190400</value>
+        <value>1324800</value>
+        <value>1478400</value>
+        <value>1574400</value>
+        <value>1708800</value>
+        <value>1804800</value>
+    </array>
+    <array name="cpu.core_speeds.cluster1">
+        <value>691200</value>
+        <value>940800</value>
+        <value>1228800</value>
+        <value>1401600</value>
+        <value>1516800</value>
+        <value>1651200</value>
+        <value>1804800</value>
+        <value>1900800</value>
+        <value>2054400</value>
+        <value>2208000</value>
+    </array>
+    <array name="cpu.core_power.cluster0">
+        <value>35</value>
+        <value>39</value>
+        <value>46</value>
+        <value>65</value>
+        <value>86</value>
+        <value>105</value>
+        <value>117</value>
+        <value>172</value>
+        <value>187</value>
+        <value>208</value>
+    </array>
+    <array name="cpu.core_power.cluster1">
+        <value>91</value>
+        <value>91</value>
+        <value>146</value>
+        <value>190</value>
+        <value>215</value>
+        <value>257</value>
+        <value>322</value>
+        <value>366</value>
+        <value>421</value>
+        <value>526</value>
+    </array>
+    <item name="cpu.idle">4.78</item>
+    <array name="memory.bandwidths">
+        <value>22.7</value>
+    </array>
+    <item name="battery.capacity">5000</item>
+    <item name="battery.typical">5000</item>
+    <item name="wifi.controller.idle">1.4</item>
+    <item name="wifi.controller.rx">177</item>
+    <item name="wifi.controller.tx">269</item>
+    <array name="wifi.controller.tx_levels" />
+    <item name="wifi.controller.voltage">3300</item>
+    <array name="wifi.batchedscan">
+        <value>.0002</value>
+        <value>.002</value>
+        <value>.02</value>
+        <value>.2</value>
+        <value>2</value>
+    </array>
+    <item name="modem.controller.sleep">0</item>
+    <item name="modem.controller.idle">1</item>
+    <item name="modem.controller.rx">200</item>
+    <array name="modem.controller.tx">
+        <value>293</value>
+        <value>296</value>
+        <value>316</value>
+        <value>401</value>
+        <value>506</value>
+    </array>
+    <item name="modem.controller.voltage">800</item>
+    <array name="gps.signalqualitybased">
+        <value>0</value>
+        <value>0</value>
+    </array>
+    <item name="gps.voltage">0</item>
+</device>
\ No newline at end of file
-- 
cgit v1.2.3