veux: Merge common tree to veux

- Ref:
  https://github.com/xiaomi-sm6375-devs/android_device_xiaomi_sm6375-common

Signed-off-by: kleidione <kleidione@gmail.com>

6 files changed, 0 insertions, 597 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
deleted file mode 100644
index 0749e77..0000000
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ /dev/null
@@ -1,374 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2009 The Android Open Source Project
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-          http://www.apache.org/licenses/LICENSE-2.0
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds.  Do not translate. -->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
-         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
-    <bool name="config_automatic_brightness_available">true</bool>
-
-    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
-         The N entries of this array define N + 1 control points as follows:
-         (1-based arrays)
-         Point 1:            (0, value[1]):             lux <= 0
-         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
-         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
-         ...
-         Point N+1: (level[N], value[N+1]):  level[N] < lux
-         The control points must be strictly increasing.  Each control point
-         corresponds to an entry in the brightness backlight values arrays.
-         For example, if lux == level[1] (first element of the levels array)
-         then the brightness will be determined by value[2] (second element
-         of the brightness values array).
-         Spline interpolation is used to determine the auto-brightness
-         backlight values for lux levels between these control points.
-         Must be overridden in platform specific overlays -->
-    <array name="config_autoBrightnessLevels">
-        <item>1</item>
-        <item>2</item>
-        <item>4</item>
-        <item>6</item>
-        <item>8</item>
-        <item>10</item>
-        <item>15</item>
-        <item>20</item>
-        <item>25</item>
-        <item>30</item>
-        <item>35</item>
-        <item>40</item>
-        <item>45</item>
-        <item>50</item>
-        <item>55</item>
-        <item>60</item>
-        <item>65</item>
-        <item>70</item>
-        <item>75</item>
-        <item>80</item>
-        <item>85</item>
-        <item>90</item>
-        <item>95</item>
-        <item>100</item>
-        <item>120</item>
-        <item>140</item>
-        <item>160</item>
-        <item>180</item>
-        <item>200</item>
-        <item>220</item>
-        <item>240</item>
-        <item>260</item>
-        <item>280</item>
-        <item>300</item>
-        <item>320</item>
-        <item>340</item>
-        <item>360</item>
-        <item>380</item>
-        <item>400</item>
-        <item>420</item>
-        <item>440</item>
-        <item>460</item>
-        <item>480</item>
-        <item>500</item>
-        <item>700</item>
-        <item>900</item>
-        <item>1100</item>
-        <item>1300</item>
-        <item>1500</item>
-        <item>1700</item>
-        <item>1900</item>
-        <item>2000</item>
-        <item>2500</item>
-        <item>3000</item>
-        <item>3500</item>
-        <item>4000</item>
-        <item>4500</item>
-        <item>5000</item>
-        <item>5500</item>
-        <item>6000</item>
-        <item>6500</item>
-        <item>7000</item>
-        <item>7500</item>
-        <item>8000</item>
-        <item>8500</item>
-        <item>9000</item>
-        <item>9500</item>
-        <item>10000</item>
-        <item>10500</item>
-        <item>11000</item>
-        <item>11500</item>
-        <item>12000</item>
-        <item>12500</item>
-        <item>13000</item>
-        <item>13500</item>
-        <item>14000</item>
-        <item>14500</item>
-        <item>15000</item>
-        <item>16000</item>
-        <item>17000</item>
-        <item>18000</item>
-        <item>19000</item>
-        <item>20000</item>
-        <item>21000</item>
-        <item>22000</item>
-        <item>23000</item>
-        <item>24000</item>
-        <item>25000</item>
-        <item>26000</item>
-        <item>27000</item>
-        <item>28000</item>
-        <item>29000</item>
-        <item>30000</item>
-        <item>35000</item>
-        <item>40000</item>
-        <item>45000</item>
-        <item>50000</item>
-        <item>55000</item>
-        <item>60000</item>
-        <item>65000</item>
-        <item>70000</item>
-        <item>75000</item>
-        <item>80000</item>
-        <item>85000</item>
-        <item>90000</item>
-        <item>95000</item>
-        <item>100000</item>
-    </array>
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
-         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
-         brightness of an all-white image.
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
-    <array name="config_autoBrightnessDisplayValuesNits">
-        <item>4.5</item>
-        <item>6.6</item>
-        <item>8.0</item>
-        <item>20.0</item>
-        <item>24.3</item>
-        <item>29.7</item>
-        <item>34.0</item>
-        <item>46.0</item>
-        <item>59.0</item>
-        <item>76.0</item>
-        <item>81.0</item>
-        <item>82.0</item>
-        <item>82.0</item>
-        <item>82.0</item>
-        <item>83.0</item>
-        <item>83.0</item>
-        <item>83.0</item>
-        <item>84.0</item>
-        <item>84.0</item>
-        <item>85.0</item>
-        <item>85.0</item>
-        <item>85.0</item>
-        <item>85.0</item>
-        <item>86.0</item>
-        <item>86.0</item>
-        <item>87.0</item>
-        <item>89.0</item>
-        <item>90.0</item>
-        <item>91.0</item>
-        <item>93.0</item>
-        <item>94.0</item>
-        <item>96.0</item>
-        <item>97.0</item>
-        <item>99.0</item>
-        <item>100.0</item>
-        <item>101.0</item>
-        <item>104.0</item>
-        <item>105.0</item>
-        <item>106.0</item>
-        <item>108.0</item>
-        <item>109.0</item>
-        <item>111.0</item>
-        <item>112.0</item>
-        <item>114.0</item>
-        <item>116.0</item>
-        <item>137.0</item>
-        <item>157.0</item>
-        <item>180.0</item>
-        <item>205.0</item>
-        <item>226.0</item>
-        <item>257.0</item>
-        <item>280.0</item>
-        <item>295.0</item>
-        <item>369.0</item>
-        <item>400.0</item>
-        <item>416.7</item>
-        <item>433.3</item>
-        <item>450.0</item>
-        <item>466.7</item>
-        <item>483.3</item>
-        <item>500.0</item>
-        <item>512.5</item>
-        <item>525.0</item>
-        <item>537.5</item>
-        <item>550.0</item>
-        <item>562.5</item>
-        <item>575.0</item>
-        <item>587.5</item>
-        <item>600.0</item>
-        <item>610.0</item>
-        <item>620.0</item>
-        <item>630.0</item>
-        <item>640.0</item>
-        <item>650.0</item>
-        <item>660.0</item>
-        <item>670.0</item>
-        <item>680.0</item>
-        <item>690.0</item>
-        <item>700.0</item>
-        <item>705.0</item>
-        <item>710.0</item>
-        <item>715.0</item>
-        <item>720.0</item>
-        <item>725.0</item>
-        <item>730.0</item>
-        <item>735.0</item>
-        <item>740.0</item>
-        <item>745.0</item>
-        <item>750.0</item>
-        <item>755.0</item>
-        <item>760.0</item>
-        <item>765.0</item>
-        <item>770.0</item>
-        <item>775.0</item>
-        <item>800.0</item>
-        <item>816.7</item>
-        <item>833.3</item>
-        <item>850.0</item>
-        <item>866.7</item>
-        <item>883.3</item>
-        <item>900.0</item>
-        <item>914.3</item>
-        <item>928.6</item>
-        <item>942.9</item>
-        <item>957.1</item>
-        <item>971.4</item>
-        <item>985.7</item>
-        <item>1000.0</item>
-    </array>
-
-    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
-         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
-         should be measured with an all white image while the display is in the fully on state.
-         Note that this value should *not* reflect the maximum brightness value for any high
-         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
-         This array should be equal in size to config_screenBrightnessBacklight -->
-    <array name="config_screenBrightnessNits">
-        <item>4.5</item>
-        <item>1000.0</item>
-    </array>
-
-    <!-- An array describing the screen's backlight values corresponding to the brightness
-         values in the config_screenBrightnessNits array.
-         This array should be equal in size to config_screenBrightnessBacklight. -->
-    <integer-array name="config_screenBrightnessBacklight">
-        <item>1</item>
-        <item>255</item>
-    </integer-array>
-
-    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
-         for debouncing the light sensor.  Different constants are used to debounce the light sensor
-         when adapting to brighter or darker environments.  This parameter controls how quickly
-         brightness changes occur in response to an observed change in light level that exceeds the
-         hysteresis threshold. -->
-    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
-    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
-
-    <!-- The maximum range of gamma adjustment possible using the screen
-         auto-brightness adjustment setting. -->
-    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
-
-    <!-- Vibrator pattern for feedback about a long screen/key press -->
-    <integer-array name="config_longPressVibePattern">
-        <item>0</item>
-        <item>10</item>
-    </integer-array>
-
-    <!-- Vibrator pattern for feedback about touching a virtual key -->
-    <integer-array name="config_virtualKeyVibePattern">
-        <item>0</item>
-        <item>10</item>
-    </integer-array>
-
-    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
-    <integer-array name="config_keyboardTapVibePattern">
-        <item>10</item>
-    </integer-array>
-
-    <!-- The bounding path of the cutout region of the main built-in display.
-         Must either be empty if there is no cutout region, or a string that is parsable by
-         {@link android.util.PathParser}.
-         The path is assumed to be specified in display coordinates with pixel units and in
-         the display's native orientation, with the origin of the coordinate system at the
-         center top of the display.
-         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
-         appended after the path string to interpret coordinates in dp instead of px units.
-         Note that a physical cutout should be configured in pixels for the best results.
-         Example for a 10px x 10px square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
-         Example for a 10dp x 10dp square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
-         @see https://www.w3.org/TR/SVG/paths.html#PathData
-         -->
-    <string name="config_mainBuiltInDisplayCutout">
-        M 25,20
-        h -50
-        v 80
-        h 50
-        Z
-    </string>
-
-    <!-- Whether device has a physical display cutout -->
-    <bool name="config_physicalDisplayCutout">true</bool>
-
-    <!-- The default refresh rate. Apollo manages this using the peak refresh rate setting, so set
-         this value to 0 so it has no effect. -->
-    <integer name="config_defaultRefreshRate">0</integer>
-
-    <!-- The default peak refresh rate. -->
-    <integer name="config_defaultPeakRefreshRate">120</integer>
-    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
-    <bool name="config_dozeAlwaysOnEnabled">true</bool>
-
-    <!-- If true, the display will be shifted around in ambient mode. -->
-    <bool name="config_enableBurnInProtection">true</bool>
-
-    <!-- Indicates whether device has a power button fingerprint sensor. -->
-    <bool name="config_is_powerbutton_fps" translatable="false" >true</bool>
-
-
-    <!-- An array of arrays of side fingerprint sensor properties relative to each display.
-         Note: this value is temporary and is expected to be queried directly
-         from the HAL in the future. -->
-    <array name="config_sfps_sensor_props" translatable="false">
-        <item>@array/config_sfps_sensor_props_0</item>
-    </array>
-
-    <array name="config_sfps_sensor_props_0" translatable="false">
-        <item></item> <!--item>displayId</item-->
-        <item>1080</item> <!--item>sensorLocationX</item-->
-        <item>920</item> <!--item>sensorLocationY</item-->
-        <item>200</item> <!--item>sensorRadius</item-->
-    </array>
-
-</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/dimens.xml b/overlay/frameworks/base/core/res/res/values/dimens.xml
deleted file mode 100644
index be50eef..0000000
--- a/overlay/frameworks/base/core/res/res/values/dimens.xml
+++ /dev/null
@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/* //device/apps/common/assets/res/any/dimens.xml
-**
-** Copyright 2006, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <dimen name="rounded_corner_content_padding">47.0px</dimen>
-    <dimen name="rounded_corner_radius">102.0px</dimen>
-    <dimen name="status_bar_height_portrait">110.0px</dimen>
-
-</resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
deleted file mode 100644
index bc60d86..0000000
--- a/overlay/frameworks/base/core/res/res/xml/power_profile.xml
+++ /dev/null
@@ -1,111 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<device name="Android">
-    <item name="ambient.on">0.1</item>
-    <item name="screen.on">100.2</item>
-    <item name="screen.full">208</item>
-    <item name="bluetooth.active">9</item>
-    <item name="bluetooth.on">0.47</item>
-    <item name="wifi.on">0.32</item>
-    <item name="wifi.active">148</item>
-    <item name="wifi.scan">25</item>
-    <item name="audio">13.6</item>
-    <item name="video">57</item>
-    <item name="camera.flashlight">86</item>
-    <item name="camera.avg">616</item>
-    <item name="gps.on">45</item>
-    <item name="radio.active">217</item>
-    <item name="radio.scanning">47</item>
-    <array name="radio.on">
-        <value>2.82</value>
-        <value>1.82</value>
-    </array>
-    <array name="cpu.active">
-        <value>0.1</value>
-    </array>
-    <array name="cpu.clusters.cores">
-        <value>6</value>
-        <value>2</value>
-    </array>
-    <array name="cpu.core_speeds.cluster0">
-        <value>300000</value>
-        <value>576000</value>
-        <value>710400</value>
-        <value>940800</value>
-        <value>1190400</value>
-        <value>1324800</value>
-        <value>1478400</value>
-        <value>1574400</value>
-        <value>1708800</value>
-        <value>1804800</value>
-    </array>
-    <array name="cpu.core_speeds.cluster1">
-        <value>691200</value>
-        <value>940800</value>
-        <value>1228800</value>
-        <value>1401600</value>
-        <value>1516800</value>
-        <value>1651200</value>
-        <value>1804800</value>
-        <value>1900800</value>
-        <value>2054400</value>
-        <value>2208000</value>
-    </array>
-    <array name="cpu.core_power.cluster0">
-        <value>35</value>
-        <value>39</value>
-        <value>46</value>
-        <value>65</value>
-        <value>86</value>
-        <value>105</value>
-        <value>117</value>
-        <value>172</value>
-        <value>187</value>
-        <value>208</value>
-    </array>
-    <array name="cpu.core_power.cluster1">
-        <value>91</value>
-        <value>91</value>
-        <value>146</value>
-        <value>190</value>
-        <value>215</value>
-        <value>257</value>
-        <value>322</value>
-        <value>366</value>
-        <value>421</value>
-        <value>526</value>
-    </array>
-    <item name="cpu.idle">4.78</item>
-    <array name="memory.bandwidths">
-        <value>22.7</value>
-    </array>
-    <item name="battery.capacity">5000</item>
-    <item name="battery.typical">5000</item>
-    <item name="wifi.controller.idle">1.4</item>
-    <item name="wifi.controller.rx">177</item>
-    <item name="wifi.controller.tx">269</item>
-    <array name="wifi.controller.tx_levels" />
-    <item name="wifi.controller.voltage">3300</item>
-    <array name="wifi.batchedscan">
-        <value>.0002</value>
-        <value>.002</value>
-        <value>.02</value>
-        <value>.2</value>
-        <value>2</value>
-    </array>
-    <item name="modem.controller.sleep">0</item>
-    <item name="modem.controller.idle">1</item>
-    <item name="modem.controller.rx">200</item>
-    <array name="modem.controller.tx">
-        <value>293</value>
-        <value>296</value>
-        <value>316</value>
-        <value>401</value>
-        <value>506</value>
-    </array>
-    <item name="modem.controller.voltage">800</item>
-    <array name="gps.signalqualitybased">
-        <value>0</value>
-        <value>0</value>
-    </array>
-    <item name="gps.voltage">0</item>
-</device>
\ No newline at end of file
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
deleted file mode 100644
index 08814de..0000000
--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ /dev/null
@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2017, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<resources>
-
-    <!-- Doze: check proximity sensor before pulsing? -->
-    <bool name="doze_proximity_check_before_pulse">false</bool>
-
-</resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml b/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
deleted file mode 100644
index 60abc46..0000000
--- a/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
+++ /dev/null
@@ -1,37 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
- * Copyright (c) 2006, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
-*/
--->
-<resources>
-
-    <!-- Location on the screen of the center of the fingerprint sensor. For devices with under
-     display fingerprint sensors, this directly corresponds to the fingerprint sensor's location.
-     For devices with sensors on the back of the device, this corresponds to the location on the
-     screen directly in front of the sensor.
-     By default, this is set to @null to use the horizontal center of the screen. -->
-    <dimen name="physical_fingerprint_sensor_center_screen_location_x">1080px</dimen>
-
-    <!--  Location on the screen of the center of the physical power button. This is a reasonable
-    default that should be overridden by device-specific overlays.  -->
-    <dimen name="physical_power_button_center_screen_location_y">1030px</dimen>
-
-     <!-- Location on the screen of the center of the fingerprint sensor. For devices with under
-     display fingerprint sensors, this directly corresponds to the fingerprint sensor's location.
-     For devices with sensors on the back of the device, this corresponds to the location on the
-     screen directly in front of the sensor. -->
-    <dimen name="physical_fingerprint_sensor_center_screen_location_y">@dimen/physical_power_button_center_screen_location_y</dimen>
-
-</resources>
diff --git a/overlay/packages/apps/Settings/res/values/config.xml b/overlay/packages/apps/Settings/res/values/config.xml
deleted file mode 100644
index 4144c28..0000000
--- a/overlay/packages/apps/Settings/res/values/config.xml
+++ /dev/null
@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2020, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <!-- Whether to show Smooth Display feature in Settings Options -->
-    <bool name="config_show_smooth_display">true</bool>
-
-</resources>