diff options
author | kleidione Freitas <kleidione@gmail.com> | 2022-03-24 09:16:43 -0300 |
---|---|---|
committer | kleidione <kleidione@gmail.com> | 2022-11-09 17:29:16 -0300 |
commit | 44d5c9e2cf9f1ce0670be5bedd1e415cd5c3e739 (patch) | |
tree | 4516fedba0c65fda9e795d8737d08a7746d41e40 /wifi | |
parent | 15eeafbf239f393fcb6ed1a719398e5b7bbd6a19 (diff) |
veux: Merge common tree to veux
- Ref:
https://github.com/xiaomi-sm6375-devs/android_device_xiaomi_sm6375-common
Signed-off-by: kleidione <kleidione@gmail.com>
Diffstat (limited to 'wifi')
-rw-r--r-- | wifi/WCNSS_qcom_cfg.ini | 569 | ||||
-rw-r--r-- | wifi/p2p_supplicant_overlay.conf | 4 | ||||
-rw-r--r-- | wifi/wpa_supplicant_overlay.conf | 8 |
3 files changed, 581 insertions, 0 deletions
diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini new file mode 100644 index 0000000..f4c666f --- /dev/null +++ b/wifi/WCNSS_qcom_cfg.ini @@ -0,0 +1,569 @@ +# This file allows user to override the factory +# defaults for the WLAN Driver + +# Enable IMPS or not +gEnableImps=1 + +# Enable BMPS or not +gEnableBmps=1 + +# Phy Mode (auto, b, g, n, etc) +# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac +# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only +# 7 = 11b only 8 = 11ac only. +gDot11Mode=0 + +# Assigned MAC Addresses - This will be used until NV items are in place +# Each byte of MAC address is represented in Hex format as XX +Intf0MacAddress=000AF58989FF +Intf1MacAddress=000AF58989FE +Intf2MacAddress=000AF58989FD +Intf3MacAddress=000AF58989FC + +# UAPSD service interval for VO,VI, BE, BK traffic +InfraUapsdVoSrvIntv=0 +InfraUapsdViSrvIntv=0 +InfraUapsdBeSrvIntv=0 +InfraUapsdBkSrvIntv=0 + +# Flag to allow STA send AddTspec even when ACM is Off +gAddTSWhenACMIsOff=1 + +#ExtR HONGMI-89896,jiyanan.wt,20210902,ADD,xiaomi general configurations +gSelect5GHzMargin=5 +roam_bad_rssi_thresh_offset_2g=0 +roam_bg_scan_bad_rssi_thresh=-76 +gStaKeepAlivePeriod = 30 +gEnablePacketLog=1 +gEnableModulatedDTIM=3 +gMaxLIModulatedDTIM=3 +groam_dense_rssi_thresh_offset=5 +gtraffic_threshold=50 +gRoamBmissFirstBcnt=10 +gRoamBmissFinalBcnt=20 +gper_roam_enabled=3 +arp_ac_category=0 +gEnableLPRx=0 +gEnableSelfRecovery=1 +enable_ftopen=0 + +# Flags to filter Mcast and Bcast RX packets. +# Value 0: No filtering, 1: Filter all Multicast. +# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast +McastBcastFilter=3 + +#Flag to enable HostARPOffload feature or not +hostArpOffload=1 + +#Flag to enable HostNSOffload feature or not +hostNSOffload=1 + +# 802.11n Protection flag +gEnableApProt=1 + +#Enable OBSS protection +gEnableApOBSSProt=1 + +#Enable/Disable UAPSD for SoftAP +gEnableApUapsd=1 + +# Fixed Rate +gFixedRate=0 + +# Maximum Tx power +# gTxPowerCap=30 + +# Fragmentation Threshold +# gFragmentationThreshold=2346 + +# RTS threshold +RTSThreshold=1048576 + +# Intra-BSS forward +gDisableIntraBssFwd=0 + +# WMM Enable/Disable +WmmIsEnabled=0 + +# 802.11d support +g11dSupportEnabled=0 + +# 802.11h support +g11hSupportEnabled=1 + +# DFS Master Capability +gEnableDFSMasterCap=1 + +# ESE Support and fast transition +EseEnabled=0 + +ImplicitQosIsEnabled=0 + +gNeighborScanTimerPeriod=200 +gNeighborLookupThreshold=76 +gNeighborScanChannelMinTime=20 +gNeighborScanChannelMaxTime=30 +gMaxNeighborReqTries=3 + +# Legacy (non-ESE, non-802.11r) Fast Roaming Support +# To enable, set FastRoamEnabled=1 +# To disable, set FastRoamEnabled=0 +FastRoamEnabled=1 + +# Check if the AP to which we are roaming is better than current AP in +# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will +# use this value as to how better the RSSI of the new/roamable AP should +# be for roaming +RoamRssiDiff=5 + +# To enable, set gRoamIntraBand=1 (Roaming within band) +# To disable, set gRoamIntraBand=0 (Roaming across band) +gRoamIntraBand=0 + +#Short Guard Interval Enable/disable +gShortGI20Mhz=1 +gShortGI40Mhz=1 + +#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled +gAPAutoShutOff=0 + +#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec +gWlanAutoShutdown = 0 + +# Not used. +gApAutoChannelSelection=0 + +#Preferred band (both or 2.4 only or 5 only) +BandCapability=0 + +#Channel Bonding +gChannelBondingMode5GHz=1 + +#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). +#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link +#is idle for last 10 seconds.) For both active and power save clients. + +#Power save clients: DUT set TIM bit from 10th second onwards and till client +#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. + +#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not +#success still we try on 11th second if not tries on 12th and so on till 15th +#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any +#case DUT will detect client got removed in (10+5) seconds. +#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. + +#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and +#it is period where we send NULL frame. +#gApLinkMonitorPeriod = 10 +#gGoLinkMonitorPeriod = 10 + +#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame +#are succeed to send or not. Hence total effective detection time is +# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / +# (gApLinkMonitorPeriod + gApKeepAlivePeriod) +gGoKeepAlivePeriod = 20 +gApKeepAlivePeriod = 20 + +#If set will start with active scan after driver load, otherwise will start with +#passive scan to find out the domain +gEnableBypass11d=1 + +#If set to 0, will not scan DFS channels +gEnableDFSChnlScan=1 + +# Enable DFS channel roam +# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE +gAllowDFSChannelRoam=1 + +gVhtChannelWidth=2 + +#Data Inactivity Timeout when in powersave (in ms) +gDataInactivityTimeout=200 + +# Set txchainmask and rxchainmask +# These parameters are used only if gEnable2x2 is 0 +# Valid values are 1,2 +# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. +# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 + +# Scan Timing Parameters +# gPassiveMaxChannelTime=110 +# gPassiveMinChannelTime=60 +gActiveMaxChannelTime=40 +gActiveMinChannelTime=20 + +#If set to 0, MCC is not allowed. +gEnableMCCMode=1 + +# MCC to SCC Switch mode: +# 0-Disable +# 1-Enable +# 2-Force SCC if same band, with SAP restart +# 3-Force SCC if same band, without SAP restart by sending (E)CSA +# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, +# without SAP restart by sending (E)CSA +gWlanMccToSccSwitchMode = 0 + +# 1=enable STBC; 0=disable STBC +gEnableRXSTBC=1 + +# 1=enable tx STBC; 0=disable +gEnableTXSTBC=1 + +# 1=enable rx LDPC; 0=disable +gEnableRXLDPC=1 + +#Enable/Disable Tx beamforming +gTxBFEnable=1 + +#Enable/Disable Tx beamformee in SAP mode +gEnableTxBFeeSAP=1 + +# Enable Tx beamforming in VHT20MHz +# Valid values are 0,1. If commented out, the default value is 0. +# 0=disable, 1=enable +gEnableTxBFin20MHz=1 + +#Enable/Disable SU Tx beamformer support. +gEnableTxSUBeamformer=1 + +gEnableFastRoamInConcurrency=1 + +#Maxium Channel time in msec +gMaxMediumTime = 6000 + +# 802.11K support +gRrmEnable=1 + +#Enable Power Save offload +gEnablePowerSaveOffload=2 + +#Enable firmware uart print +gEnablefwprint=0 + +# Firmware log mode +# Valid values are 0,1,2 +# 0=Disable, 1=WMI, 2=DIAG +gEnablefwlog=1 + +# Maximum Receive AMPDU size (VHT only. Valid values: +# 0->8k 1->16k 2->32k 3->64k 4->128k) +gVhtAmpduLenExponent=7 + +# Maximum MPDU length (VHT only. Valid values: +# 0->3895 octets, 1->7991 octets, 2->11454 octets) +gVhtMpduLen=2 + +# Maximum number of wow filters required +#gMaxWoWFilters=22 + +# WOW Enable/Disable. +# 0 - Disable both magic pattern match and pattern byte match. +# 1 - Enable magic pattern match on all interfaces. +# 2 - Enable pattern byte match on all interfaces. +# 3 - Enable both magic pattern and pattern byte match on all interfaces. +# Default value of gEnableWoW is 3. +# gEnableWoW=0 + +# Enable or Disable MCC Adaptive Scheduler at the FW +# 1=Enable (default), 0=Disable +gEnableMCCAdaptiveScheduler=1 + +#Enable or Disable p2p device address administered +isP2pDeviceAddrAdministrated=0 + +# Remove Overlap channel restriction +gEnableOverLapCh=0 + +#Enable VHT on 2.4Ghz +gEnableVhtFor24GHzBand=1 + +#Maximum number of offload peers supported +# gMaxOffloadPeers=2 + +# controlling the following offload patterns +# through ini parameter. Default value is 1 +# to disable set it to zero. ssdp = 0 +# Setup multicast pattern for mDNS 224.0.0.251, +# SSDP 239.255.255.250 and LLMNR 224.0.0.252 +ssdp=0 + +#Enable Memory Deep Sleep +gEnableMemDeepSleep=1 + +# Regulatory Setting; 0=STRICT; 1=CUSTOM +gRegulatoryChangeCountry=1 + +# RA filtering rate limit param, the current value would not +# help if the lifetime in RA is less than 3*60=3min. Then +# we need to change it, though it is uncommon. +# gRAFilterEnable=0 +gRArateLimitInterval=600 + +# Maximum number of concurrent connections +gMaxConcurrentActiveSessions=3 + +# Disable/Enable GreenAP +# 0 to disable, 1 to enable, default: 1 +gEnableGreenAp=1 + +# Radar PRI multiplier +gDFSradarMappingPriMultiplier=4 + +gPNOScanSupport=1 + +#Enable/Disable LPASS support +# 0 to disable, 1 to enable +gEnableLpassSupport=1 + +# Whether userspace country code setting shld have priority +gCountryCodePriority=1 + +# Enable(1)/Disable(0) SIFS burst +gEnableSifsBurst=1 + +# Enable or Disable Multi-user MIMO +# 1=Enable (default), 0=Disable +gEnableMuBformee=1 + +# Enable/Disable channel avoidance for SAP in SCC scenario +# 0 - disable +# 1 - enable +gSapSccChanAvoidance=0 + +# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode +gIbssTxSpEndInactivityTime=10 + +# Enable TDLS External Control. That is, user space application has to +# first configure a peer MAC in wlan driver towards which TDLS is desired. +# Device will establish TDLS only towards those configured peers whenever +# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS +# when teardown criteria (idle packet count and RSSI) is met. However, +# device will accept TDLS connection if it is initiated from any other peer, +# even if that peer is not configured. +# 0 - disable +# 1 - enable +# For TDLS External Control, Implicit Trigger must also be enabled. +gTDLSExternalControl=0 + +# Enable support for TDLS off-channel operation +# 0 - disable +# 1 - enable +# TDLS off-channel operation will be invoked when there is only one +# TDLS connection. +gEnableTDLSOffChannel=0 + +# Enable or Disable Random MAC (Spoofing) +# 1=Enable (default), 0=Disable +gEnableMacAddrSpoof=1 + +################ Datapath feature set Begin ################ +# Bus bandwidth threshold values in terms of number of packets +gBusBandwidthHighThreshold=2000 +gBusBandwidthMediumThreshold=500 +gBusBandwidthLowThreshold=150 + +# Bus bandwidth compute timeout value in ms +gBusBandwidthComputeInterval=100 + +# VHT Tx/Rx MCS values +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gVhtRxMCS=2 +gVhtTxMCS=2 + +# VHT Tx/Rx MCS values for 2x2 +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 + +#IPA config is a bit mask and following are the configurations. +#bit0 IPA Enable +#bit1 IPA PRE Filter enable +#bit2 IPv6 enable +#bit3 IPA Resource Manager (RM) enable +#bit4 IPA Clock scaling enable +#bit5 IPA uC ENABLE +#bit6 IPA uC STA ENABLE +#bit8 IPA Real Time Debugging +gIPAConfig=0x7d +gIPADescSize=800 + +# Enable/Disable RX full reorder offload +gReorderOffloadSupported=1 + +# Enable CE classification +# 1 - enable(default) 0 - disable +gCEClassifyEnable=1 + +# Enable Rx handling options +# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) +rx_mode=5 + +# Enable(Tx) fastpath for data traffic. +# 1 - enable(default) 0 - disable +gEnableFastPath=1 + +# This flag enables IP, TCP and UDP checksum offload +# 1 - enable(default) 0 - disable +gEnableIpTcpUdpChecksumOffload=1 + +# Enable TCP Segmentation Offload +# 1 - enable 0 - disable +TSOEnable=1 + +# Enable Generic Receive Offload +# 1 - enable(default) 0 - disable +GROEnable=1 + +# Enable HT MPDU Density +# 4 for 2 micro sec +ght_mpdu_density=4 + +# Enable flow steering to enable multiple CEs for Rx flows. +# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. +# Parallel Rx paths. +# 1 - enable 0 - disable(default) +gEnableFlowSteering=1 + +# Time in microseconds after which a NAPI poll must yield +ce_service_max_yield_time=500 + +#Maximum number of HTT messages to be processed per NAPI poll +ce_service_max_rx_ind_flush=1 + +# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND +maxMSDUsPerRxInd=8 + +# Enable NUD tracking feature +#ExtR HONGMI-89823,jiyanan.wt,20210909,DEL,remove the disconnect logic in driver when NUD_FAILED happen +# 1 - enable 0 - disable(default) 2- roam +gEnableNUDTracking=2 + +# Enable PEER UNMAP CONF SUPPORT +# 1 - enable 0 - disable(default) +gEnablePeerUnmapConfSupport=1 + +rpsRxQueueCpuMapList=f3 +################ Datapath feature set End ################ + +################ NAN feature set start ################### + +# Enable NAN discovery (NAN 1.0) +# 1 - enable 0 - disable(default) +gEnableNanSupport=1 +# Enable NAN Datapath +genable_nan_datapath=1 + +################ NAN feature set end ##################### + +adaptive_dwell_mode_enabled=1 + +hostscan_adaptive_dwell_mode=1 + +adapt_dwell_lpf_weight=80 + +adapt_dwell_wifi_act_threshold=10 + +MAWCEnabled=0 + +# Enable/Disable rtt sta mac randomization +enable_rtt_mac_randomization=1 + +#Enable/Disable SNR monitoring +gEnableSNRMonitoring=1 + +# Rx thread affinity mask in UL case +RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0 + +#ExtR HONGMI-89826,jiyanan.wt,ADD,enable driver reg_db.c's modification +ignore_fw_reg_offload_ind=1 + +# Packet Log buffer size +PktlogBufSize=1 + +# Disable/Enbale Enhanced Green AP +# 0 to disable, 1 to enable, default: 0 +gEnableEGAP=1 + +# Enable support for TDLS +# 0 - disable +# 1 - enable +gEnableTDLSSupport=1 + +# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall +# initiate TDLS Discovery towards a peer whenever setup criteria (throughput +# and RSSI) is met and then will initiate teardown when teardown criteria +# (idle packet count and RSSI) is met. +# 0 - disable +# 1 - enable +gEnableTDLSImplicitTrigger=1 + +# 0: Disable BPF packet filter +# 1: Enable BPF packet filter +gBpfFilterEnable=1 + +# set modulated DTIM interval +gEnableModulatedDTIM=3 +gMaxLIModulatedDTIM=3 + +#disable probe request deferral +oce_enable_probe_req_deferral=0 + +# WLM latency Enable +wlm_latency_enable=1 + +# WLM flags setting for ultralow level, bit9 for BMPS disabled +wlm_latency_flags_ultralow=0xe03 + +#Enable ETSI SRD channels by Xiaomi. Qualcom default value is disable +#ExtB HONGMI-117643,liupeng.wt.Add,20211221 add SAP + p2p mode +etsi13_srd_chan_in_master_mode=3 + +# Allow STASAP SCC on DFS channel with master mode support disabled +# PICASSO-986 +g_sta_sap_scc_on_dfs_chan=1 + +#max time for active 2G channel scan. +#if set to zero, gActiveMaxChannelTime is used for 2G channel scan. +active_max_channel_time_2g=0 + +# Create another interface during driver load +gEnableConcurrentSTA=wlan1 + +# mawc_roam_enabled - Enable/Disable MAWC during roaming +mawc_roam_enabled=0 + +# Enable/Disable the Motion Aided Wireless Connectivity +# based NLO using this parameter +mawc_nlo_enabled=0 + +# Enable Packet filters before going into suspend +# will clear those when resume +# bit-0 : drop MAC multicast and IPv4 multicast +# bit-1 : drop MAC unicast and IPv4 multicast +# bit-2 : drop IPv4 broadcast +# bit-3 : drop XID - Exchange station Identification packet +# bit-4 : drop STP - Spanning Tree Protocol +# bit-5 : drop DTP/LLC/CDP +g_enable_packet_filter_bitmap=0 +# This ini is used to allow STASAP SCC on LTE coex channel +# 0 - Disallow STASAP SCC on LTE coex channel +# 1 - Allow STASAP SCC on LTE coex channel +g_sta_sap_scc_on_lte_coex_chan=1 + +# enable/disable GCMP to fix throughput issue +gcmp_enabled=1 + +drop_bcn_on_chan_mismatch=0 + +#ExtB HONGMI-118308,jiyanan.wt,ADD,20220104,enable indoor channel in SAP mode +gindoor_channel_support=1 + +END + +# Note: Configuration parser would not read anything past the END marker diff --git a/wifi/p2p_supplicant_overlay.conf b/wifi/p2p_supplicant_overlay.conf new file mode 100644 index 0000000..2b27c5b --- /dev/null +++ b/wifi/p2p_supplicant_overlay.conf @@ -0,0 +1,4 @@ +disable_scan_offload=1 +p2p_no_group_iface=1 +persistent_reconnect=1 +bss_max_count=400 diff --git a/wifi/wpa_supplicant_overlay.conf b/wifi/wpa_supplicant_overlay.conf new file mode 100644 index 0000000..2b924ac --- /dev/null +++ b/wifi/wpa_supplicant_overlay.conf @@ -0,0 +1,8 @@ +disable_scan_offload=1 +p2p_disabled=1 +tdls_external_control=1 +wowlan_triggers=magic_pkt +bss_max_count=400 +interworking=1 +config_methods=virtual_display virtual_push_button keypad +driver_param="use_p2p_group_interface=1 no_rrm=1" |