aboutsummaryrefslogtreecommitdiff
path: root/overlay/frameworks/base/core/res
diff options
context:
space:
mode:
Diffstat (limited to 'overlay/frameworks/base/core/res')
-rw-r--r--overlay/frameworks/base/core/res/res/values/config.xml336
-rw-r--r--overlay/frameworks/base/core/res/res/values/dimens.xml26
2 files changed, 362 insertions, 0 deletions
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
new file mode 100644
index 0000000..142540b
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,336 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+ http://www.apache.org/licenses/LICENSE-2.0
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- These resources are around just to allow their values to be customized
+ for different hardware and product builds. Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+ <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
+ Software implementation will be used if config_hardware_auto_brightness_available is not set -->
+ <bool name="config_automatic_brightness_available">true</bool>
+
+ <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+ The N entries of this array define N + 1 control points as follows:
+ (1-based arrays)
+ Point 1: (0, value[1]): lux <= 0
+ Point 2: (level[1], value[2]): 0 < lux <= level[1]
+ Point 3: (level[2], value[3]): level[2] < lux <= level[3]
+ ...
+ Point N+1: (level[N], value[N+1]): level[N] < lux
+ The control points must be strictly increasing. Each control point
+ corresponds to an entry in the brightness backlight values arrays.
+ For example, if lux == level[1] (first element of the levels array)
+ then the brightness will be determined by value[2] (second element
+ of the brightness values array).
+ Spline interpolation is used to determine the auto-brightness
+ backlight values for lux levels between these control points.
+ Must be overridden in platform specific overlays -->
+ <array name="config_autoBrightnessLevels">
+ <item>1</item>
+ <item>2</item>
+ <item>4</item>
+ <item>6</item>
+ <item>8</item>
+ <item>10</item>
+ <item>15</item>
+ <item>20</item>
+ <item>25</item>
+ <item>30</item>
+ <item>35</item>
+ <item>40</item>
+ <item>45</item>
+ <item>50</item>
+ <item>55</item>
+ <item>60</item>
+ <item>65</item>
+ <item>70</item>
+ <item>75</item>
+ <item>80</item>
+ <item>85</item>
+ <item>90</item>
+ <item>95</item>
+ <item>100</item>
+ <item>120</item>
+ <item>140</item>
+ <item>160</item>
+ <item>180</item>
+ <item>200</item>
+ <item>220</item>
+ <item>240</item>
+ <item>260</item>
+ <item>280</item>
+ <item>300</item>
+ <item>320</item>
+ <item>340</item>
+ <item>360</item>
+ <item>380</item>
+ <item>400</item>
+ <item>420</item>
+ <item>440</item>
+ <item>460</item>
+ <item>480</item>
+ <item>500</item>
+ <item>700</item>
+ <item>900</item>
+ <item>1100</item>
+ <item>1300</item>
+ <item>1500</item>
+ <item>1700</item>
+ <item>1900</item>
+ <item>2000</item>
+ <item>2500</item>
+ <item>3000</item>
+ <item>3500</item>
+ <item>4000</item>
+ <item>4500</item>
+ <item>5000</item>
+ <item>5500</item>
+ <item>6000</item>
+ <item>6500</item>
+ <item>7000</item>
+ <item>7500</item>
+ <item>8000</item>
+ <item>8500</item>
+ <item>9000</item>
+ <item>9500</item>
+ <item>10000</item>
+ <item>10500</item>
+ <item>11000</item>
+ <item>11500</item>
+ <item>12000</item>
+ <item>12500</item>
+ <item>13000</item>
+ <item>13500</item>
+ <item>14000</item>
+ <item>14500</item>
+ <item>15000</item>
+ <item>16000</item>
+ <item>17000</item>
+ <item>18000</item>
+ <item>19000</item>
+ <item>20000</item>
+ <item>21000</item>
+ <item>22000</item>
+ <item>23000</item>
+ <item>24000</item>
+ <item>25000</item>
+ <item>26000</item>
+ <item>27000</item>
+ <item>28000</item>
+ <item>29000</item>
+ <item>30000</item>
+ <item>35000</item>
+ <item>40000</item>
+ <item>45000</item>
+ <item>50000</item>
+ <item>55000</item>
+ <item>60000</item>
+ <item>65000</item>
+ <item>70000</item>
+ <item>75000</item>
+ <item>80000</item>
+ <item>85000</item>
+ <item>90000</item>
+ <item>95000</item>
+ <item>100000</item>
+ </array>
+
+ <!-- Array of desired screen brightness in nits corresponding to the lux values
+ in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
+ config_screenBrightnessMaximumNits, the display brightness is defined as the measured
+ brightness of an all-white image.
+ If this is defined then:
+ - config_autoBrightnessLcdBacklightValues should not be defined
+ - config_screenBrightnessNits must be defined
+ - config_screenBrightnessBacklight must be defined
+ This array should have size one greater than the size of the config_autoBrightnessLevels
+ array. The brightness values must be non-negative and non-decreasing. This must be
+ overridden in platform specific overlays -->
+ <array name="config_autoBrightnessDisplayValuesNits">
+ <item>4.5</item>
+ <item>6.6</item>
+ <item>8.0</item>
+ <item>20.0</item>
+ <item>24.3</item>
+ <item>29.7</item>
+ <item>34.0</item>
+ <item>46.0</item>
+ <item>59.0</item>
+ <item>76.0</item>
+ <item>81.0</item>
+ <item>82.0</item>
+ <item>82.0</item>
+ <item>82.0</item>
+ <item>83.0</item>
+ <item>83.0</item>
+ <item>83.0</item>
+ <item>84.0</item>
+ <item>84.0</item>
+ <item>85.0</item>
+ <item>85.0</item>
+ <item>85.0</item>
+ <item>85.0</item>
+ <item>86.0</item>
+ <item>86.0</item>
+ <item>87.0</item>
+ <item>89.0</item>
+ <item>90.0</item>
+ <item>91.0</item>
+ <item>93.0</item>
+ <item>94.0</item>
+ <item>96.0</item>
+ <item>97.0</item>
+ <item>99.0</item>
+ <item>100.0</item>
+ <item>101.0</item>
+ <item>104.0</item>
+ <item>105.0</item>
+ <item>106.0</item>
+ <item>108.0</item>
+ <item>109.0</item>
+ <item>111.0</item>
+ <item>112.0</item>
+ <item>114.0</item>
+ <item>116.0</item>
+ <item>137.0</item>
+ <item>157.0</item>
+ <item>180.0</item>
+ <item>205.0</item>
+ <item>226.0</item>
+ <item>257.0</item>
+ <item>280.0</item>
+ <item>295.0</item>
+ <item>369.0</item>
+ <item>400.0</item>
+ <item>416.7</item>
+ <item>433.3</item>
+ <item>450.0</item>
+ <item>466.7</item>
+ <item>483.3</item>
+ <item>500.0</item>
+ <item>512.5</item>
+ <item>525.0</item>
+ <item>537.5</item>
+ <item>550.0</item>
+ <item>562.5</item>
+ <item>575.0</item>
+ <item>587.5</item>
+ <item>600.0</item>
+ <item>610.0</item>
+ <item>620.0</item>
+ <item>630.0</item>
+ <item>640.0</item>
+ <item>650.0</item>
+ <item>660.0</item>
+ <item>670.0</item>
+ <item>680.0</item>
+ <item>690.0</item>
+ <item>700.0</item>
+ <item>705.0</item>
+ <item>710.0</item>
+ <item>715.0</item>
+ <item>720.0</item>
+ <item>725.0</item>
+ <item>730.0</item>
+ <item>735.0</item>
+ <item>740.0</item>
+ <item>745.0</item>
+ <item>750.0</item>
+ <item>755.0</item>
+ <item>760.0</item>
+ <item>765.0</item>
+ <item>770.0</item>
+ <item>775.0</item>
+ <item>800.0</item>
+ <item>816.7</item>
+ <item>833.3</item>
+ <item>850.0</item>
+ <item>866.7</item>
+ <item>883.3</item>
+ <item>900.0</item>
+ <item>914.3</item>
+ <item>928.6</item>
+ <item>942.9</item>
+ <item>957.1</item>
+ <item>971.4</item>
+ <item>985.7</item>
+ <item>1000.0</item>
+ </array>
+
+ <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
+ values in the config_screenBrightnessBacklight array. On OLED displays these values
+ should be measured with an all white image while the display is in the fully on state.
+ Note that this value should *not* reflect the maximum brightness value for any high
+ brightness modes but only the maximum brightness value obtainable in a sustainable manner.
+ This array should be equal in size to config_screenBrightnessBacklight -->
+ <array name="config_screenBrightnessNits">
+ <item>4.5</item>
+ <item>1000.0</item>
+ </array>
+
+ <!-- An array describing the screen's backlight values corresponding to the brightness
+ values in the config_screenBrightnessNits array.
+ This array should be equal in size to config_screenBrightnessBacklight. -->
+ <integer-array name="config_screenBrightnessBacklight">
+ <item>1</item>
+ <item>255</item>
+ </integer-array>
+
+ <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
+ for debouncing the light sensor. Different constants are used to debounce the light sensor
+ when adapting to brighter or darker environments. This parameter controls how quickly
+ brightness changes occur in response to an observed change in light level that exceeds the
+ hysteresis threshold. -->
+ <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
+ <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
+
+ <!-- The maximum range of gamma adjustment possible using the screen
+ auto-brightness adjustment setting. -->
+ <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
+
+ <!-- The bounding path of the cutout region of the main built-in display.
+ Must either be empty if there is no cutout region, or a string that is parsable by
+ {@link android.util.PathParser}.
+ The path is assumed to be specified in display coordinates with pixel units and in
+ the display's native orientation, with the origin of the coordinate system at the
+ center top of the display.
+ To facilitate writing device-independent emulation overlays, the marker `@dp` can be
+ appended after the path string to interpret coordinates in dp instead of px units.
+ Note that a physical cutout should be configured in pixels for the best results.
+ Example for a 10px x 10px square top-center cutout:
+ <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
+ Example for a 10dp x 10dp square top-center cutout:
+ <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
+ @see https://www.w3.org/TR/SVG/paths.html#PathData
+ -->
+ <string name="config_mainBuiltInDisplayCutout">
+ M 25,20
+ h -50
+ v 80
+ h 50
+ Z
+ </string>
+
+ <!-- Whether device has a physical display cutout -->
+ <bool name="config_physicalDisplayCutout">true</bool>
+
+ <!-- The default refresh rate. Apollo manages this using the peak refresh rate setting, so set
+ this value to 0 so it has no effect. -->
+ <integer name="config_defaultRefreshRate">0</integer>
+
+ <!-- The default peak refresh rate. -->
+ <integer name="config_defaultPeakRefreshRate">120</integer>
+ <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+ <bool name="config_dozeAlwaysOnEnabled">true</bool>
+
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/dimens.xml b/overlay/frameworks/base/core/res/res/values/dimens.xml
new file mode 100644
index 0000000..be50eef
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/dimens.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/dimens.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+** http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+ <dimen name="rounded_corner_content_padding">47.0px</dimen>
+ <dimen name="rounded_corner_radius">102.0px</dimen>
+ <dimen name="status_bar_height_portrait">110.0px</dimen>
+
+</resources>