veux: Merge common tree to veux

- Ref:
  https://github.com/xiaomi-sm6375-devs/android_device_xiaomi_sm6375-common

Signed-off-by: kleidione <kleidione@gmail.com>

1 files changed, 391 insertions, 0 deletions

diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
new file mode 100644
index 0000000..1bab008
--- /dev/null
+++ b/gps/etc/gps.conf
@@ -0,0 +1,391 @@
+# Error Estimate
+# _SET = 1
+# _CLEAR = 0
+ERR_ESTIMATE=0
+
+#NTP server
+NTP_SERVER=time.xtracloud.net
+
+#XTRA CA path
+XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
+
+# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
+#               4 - Debug, 5 - Verbose
+# If DEBUG_LEVEL is commented, Android's logging levels will be used
+DEBUG_LEVEL = 2
+
+# Intermediate position report, 1=enable, 0=disable
+INTERMEDIATE_POS=0
+
+# supl version 1.0
+SUPL_VER=0x10000
+
+# Emergency SUPL, 1=enable, 0=disable
+#SUPL_ES=1
+
+#Choose PDN for Emergency SUPL
+#1 - Use emergency PDN
+#0 - Use regular SUPL PDN for Emergency SUPL
+#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
+
+#SUPL_MODE is a bit mask set in config.xml per carrier by default.
+#If it is uncommented here, this value will overwrite the value from
+#config.xml.
+#MSA=0X2
+#MSB=0X1
+#SUPL_MODE=
+
+# GPS Capabilities bit mask
+# SCHEDULING = 0x01
+# MSB = 0x02
+# MSA = 0x04
+# ON_DEMAND_TIME = 0x10
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
+CAPABILITIES=0x17
+
+# Accuracy threshold for intermediate positions
+# less accurate positions are ignored, 0 for passing all positions
+# ACCURACY_THRES=5000
+
+################################
+##### AGPS server settings #####
+################################
+
+# FOR SUPL SUPPORT, set the following
+# SUPL_HOST=supl.host.com or IP
+# SUPL_PORT=1234
+
+# FOR MO SUPL SUPPORT, set the following
+# MO_SUPL_HOST=supl.host.com or IP
+# MO_SUPL_PORT=1234
+
+# FOR C2K PDE SUPPORT, set the following
+# C2K_HOST=c2k.pde.com or IP
+# C2K_PORT=1234
+
+# Bitmask of slots that are available
+# for write/install to, where 1s indicate writable,
+# and the default value is 0 where no slots
+# are writable. For example, AGPS_CERT_WRITABLE_MASK
+# of b1000001010 makes 3 slots available
+# and the remaining 7 slots unwritable.
+#AGPS_CERT_WRITABLE_MASK=0
+
+####################################
+#  LTE Positioning Profile Settings
+####################################
+# LPP_PROFILE is a bit mask
+# 0: Enable RRLP on LTE(Default)
+# 0x1: LPP User Plane
+# 0x2: LPP Control Plane
+# 0x4: LPP User Plane for NR5G
+# 0x8: LPP Control Plane for NR5G
+LPP_PROFILE = 2
+
+####################################
+#Datum Type
+####################################
+# 0: WGS-84
+# 1: PZ-90
+DATUM_TYPE = 0
+
+################################
+# EXTRA SETTINGS
+################################
+# NMEA provider (1=Modem Processor, 0=Application Processor)
+NMEA_PROVIDER=0
+
+################################
+# NMEA TAG BLOCK GROUPING
+################################
+# NMEA tag block grouping is only applicable to GSA
+# Default is disabled
+# 0 - disabled
+# 1 - enabled
+NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
+
+# Customized NMEA GGA fix quality that can be used to tell
+# whether SENSOR contributed to the fix.
+#
+# When this configuration item is not enabled (set to any value that is not 1),
+# GGA fix quality conforms to NMEA standard spec as below:
+# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
+# RTK fixed fix w/ or w/o sensor: 4
+# RTK float fix w/ or w/o sensor: 5
+# SPE fix w/ or w/o sensor: 1
+# Sensor dead reckoning fix: 6
+#
+# When this configuration is enabled (set to 1), GGA fix quality
+# will be output as below:
+# PPP fix w/o sensor: 59,                  w/ sensor: 69
+# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
+# RTK fixed fix w/o sensor: 4,             w/ sensor: 64
+# RTK float fix w/o sensor: 5,             w/ sensor: 65,
+# SPE fix w/o sensor: 1,               and w/ sensor: 61
+# Sensor dead reckoning fix: 6
+#
+# any value that is not 1 - disabled
+# 1 - enabled
+CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
+
+################################
+# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
+################################
+# NMEA Reporting Rate
+# Set it to "1HZ" for 1Hz NMEA Reporting
+# Set it to "NHZ" for NHz NMEA Reporting
+#Default : NHZ (overridden by position update rate if set to lower rates)
+NMEA_REPORT_RATE=NHZ
+
+# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
+SGLTE_TARGET=0
+
+##################################################
+# Select Positioning Protocol on A-GLONASS system
+##################################################
+# 0x1: RRC CPlane
+# 0x2: RRLP UPlane
+# 0x4: LLP Uplane
+A_GLONASS_POS_PROTOCOL_SELECT = 0
+
+##################################################
+# Select technology for LPPe Control Plane
+##################################################
+# 0x1: DBH for LPPe CP
+# 0x2: WLAN AP Measurements for LPPe CP
+# 0x4: SRN AP measurement for CP
+# 0x8: Sensor Barometer Measurement LPPe CP
+#LPPE_CP_TECHNOLOGY = 0
+
+##################################################
+# Select technology for LPPe User Plane
+##################################################
+# 0x1: DBH for LPPe UP
+# 0x2: WLAN AP Measurements for LPPe UP
+# 0x4: SRN AP measurement for UP
+# 0x8: Sensor Barometer Measurement LPPe UP
+#LPPE_UP_TECHNOLOGY = 0
+
+##################################################
+# AGPS_CONFIG_INJECT
+##################################################
+# enable/disable injection of AGPS configurations:
+#     SUPL_VER
+#     SUPL_HOST
+#     SUPL_PORT
+#     MO_SUPL_HOST
+#     MO_SUPL_PORT
+#     C2K_HOST
+#     C2K_PORT
+#     LPP_PROFILE
+#     A_GLONASS_POS_PROTOCOL_SELECT
+# 0: disable
+# 1: enable
+AGPS_CONFIG_INJECT = 1
+
+##################################################
+# GNSS settings for automotive use cases
+# Configurations in following section are
+# specific to automotive use cases, others
+# please do not change, keep the default values
+##################################################
+
+# AP Coarse Timestamp Uncertainty
+##################################################
+# default : 10
+# AP time stamp uncertainty, until GNSS receiver
+# is able to acquire better timing information
+AP_TIMESTAMP_UNCERTAINTY = 10
+
+#####################################
+# DR_SYNC Pulse Availability
+#####################################
+# 0 : DR_SYNC pulse not available (default)
+# 1 : DR_SYNC pulse available
+# This configuration enables the driver to make use
+# of PPS events generated by DR_SYNC pulse
+# Standard Linux PPS driver needs to be enabled
+DR_SYNC_ENABLED = 0
+
+#####################################
+# PPS Device name
+#####################################
+PPS_DEVICENAME = /dev/pps0
+
+#####################################
+# Ignore PPS at Startup and after long outage
+#####################################
+IGNORE_PPS_PULSE_COUNT = 1
+
+#####################################
+# Long GNSS RF outage in seconds
+#####################################
+GNSS_OUTAGE_DURATION = 10
+
+#####################################
+# AP Clock Accuracy
+#####################################
+# Quality of APPS processor clock (in PPM).
+# Value specified is used for calculation of
+# APPS time stamp uncertainty
+AP_CLOCK_PPM = 100
+
+#####################################
+# MAX ms difference to detect missing pulse
+#####################################
+# Specifies time threshold in ms to validate any missing PPS pulses
+MISSING_PULSE_TIME_DELTA = 900
+
+#####################################
+# Propagation time uncertainty
+#####################################
+# This settings enables time uncertainty propagation
+# logic incase of missing PPS pulse
+PROPAGATION_TIME_UNCERTAINTY = 1
+
+#######################################
+#  APN / IP Type Configuration
+#  APN and IP Type to use for setting
+#  up WWAN call.
+#  Use below values for IP Type:
+#  v4 = 4
+#  v6 = 6
+#  v4v6 = 10
+#######################################
+# INTERNET_APN = abc.xyz
+# INTERNET_IP_TYPE = 4
+# SUPL_APN = abc.xyz
+# SUPL_IP_TYPE = 4
+
+#####################################
+# Modem type
+#####################################
+# This setting configures modem type
+# (external=0 or internal=1)
+# comment out the next line to vote
+# for the first modem in the list
+MODEM_TYPE = 1
+
+##################################################
+# CONSTRAINED TIME UNCERTAINTY MODE
+##################################################
+# 0 : disabled (default)
+# 1 : enabled
+# This setting enables GPS engine to keep its time
+# uncertainty below the specified constraint
+#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
+
+# If constrained time uncertainty mode is enabled,
+# this setting specifies the time uncertainty
+# threshold that gps engine need to maintain.
+# In unit of milli-seconds.
+# Default is 0.0 meaning that modem default value
+# of time uncertainty threshold will be used.
+#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
+
+# If constrained time uncertainty mode is enabled,
+# this setting specifies the power budget that
+# gps engine is allowed to spend to maintain the time
+# uncertainty.
+# Default is 0 meaning that GPS engine is not constained
+# by power budget and can spend as much power as needed.
+# In unit of 0.1 milli watt second.
+#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
+
+##################################################
+# POSITION ASSISTED CLOCK ESTIMATOR
+##################################################
+# 0 : disabled (default)
+# 1 : enabled
+# This setting enables GPS engine to estimate clock
+# bias and drift when the signal from at least 1
+# SV is available and the UE's position is known by
+# other position engines.
+#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
+
+#####################################
+# proxyAppPackageName
+#####################################
+# This is a string that is sent to the framework
+# in nfwNotifyCb callback
+PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
+
+#####################################
+# CP_MTLR_ES
+#####################################
+# CP MTLR ES, 1=enable, 0=disable
+CP_MTLR_ES=0
+
+##################################################
+# GNSS_DEPLOYMENT
+##################################################
+# 0 : Enable QTI GNSS (default)
+# 1 : Enable QCSR SS5
+# 2 : Enable PDS API
+# This setting use to select between QTI GNSS,
+# QCSR SS5 hardware receiver, and PDS API.
+# By default QTI GNSS receiver is enabled.
+# GNSS_DEPLOYMENT = 0
+
+##################################################
+## LOG BUFFER CONFIGURATION
+##################################################
+#LOG_BUFFER_ENABLED, 1=enable, 0=disable
+#*_LEVEL_TIME_DEPTH, maximum time depth of level *
+#in log buffer, unit is second
+#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
+#log print sentences in log buffer
+LOG_BUFFER_ENABLED = 0
+E_LEVEL_TIME_DEPTH = 600
+E_LEVEL_MAX_CAPACITY = 50
+W_LEVEL_TIME_DEPTH = 500
+W_LEVEL_MAX_CAPACITY = 100
+I_LEVEL_TIME_DEPTH = 400
+I_LEVEL_MAX_CAPACITY = 200
+D_LEVEL_TIME_DEPTH = 30
+D_LEVEL_MAX_CAPACITY = 300
+V_LEVEL_TIME_DEPTH = 200
+V_LEVEL_MAX_CAPACITY = 400
+
+##################################################
+# Allow buffer diag log packets when diag memory allocation
+# fails during boot up time.
+##################################################
+BUFFER_DIAG_LOGGING = 1
+
+#######################################
+#  NTRIP CLIENT LIBRARY NAME
+#######################################
+# NTRIP_CLIENT_LIB_NAME =
+
+##################################################
+# Correction Data Framework settings
+# Default values:
+# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
+# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
+# CDFW_RTCM_MESSAGE_INTERVAL = 1000  //1 second
+#
+# If multiple sources coexist on a PL,
+# the prorioty sequence can be set by the integer number.
+# PRIORITY_1 is higher than PRIORITY_2, for example,
+# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
+# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
+##################################################
+
+##################################################
+# RF LOSS
+# The loss in 0.1 dbHz from the C/N0 at the antenna port
+# These values must be configured by OEM if not
+# supported in QMI LOC message
+# There is one entry for each signal type
+##################################################
+RF_LOSS_GPS = 0
+RF_LOSS_GPS_L5 = 0
+RF_LOSS_GLO_LEFT = 0
+RF_LOSS_GLO_CENTER = 0
+RF_LOSS_GLO_RIGHT = 0
+RF_LOSS_BDS = 0
+RF_LOSS_BDS_B2A = 0
+RF_LOSS_GAL = 0
+RF_LOSS_GAL_E5 = 0
+RF_LOSS_NAVIC = 0